Revit MEP

Reply
Distinguished Mentor
asommer
Posts: 755
Registered: ‎08-10-2009
Message 1 of 13 (363 Views)
Accepted Solution

Attached Duct not moving with Diffuser

363 Views, 12 Replies
09-17-2012 08:44 AM

2013 MEP - I have diffusers hosted to a Reference Plane.  If I move the plane, the diffusers will move, but the duct detaches itself from the diffuser.  The flows seem to remain.  This did not happen in previous versions.

 

Anyone else notice this?

Product Support
alan.quinn
Posts: 566
Registered: ‎09-08-2010
Message 2 of 13 (305 Views)

Re: Attached Duct not moving with Diffuser

09-19-2012 11:08 AM in reply to: asommer

I tested and it seems to work for me. See the following video and file

 

https://dl.dropbox.com/u/11938886/07639255_Video_1.mp4

https://dl.dropbox.com/u/11938886/07639255_File.rvt

 

If you are doing something different and its not working I will need to know your steps. Please create a video and post for review.

 

Thanks for posting.

 

 

 



Alan Quinn
Support Specialist
Product Support
Autodesk, Inc.
Distinguished Mentor
asommer
Posts: 755
Registered: ‎08-10-2009
Message 3 of 13 (287 Views)

Re: Attached Duct not moving with Diffuser

09-21-2012 11:53 AM in reply to: asommer

Try a Sidewall Diffuser (Vertical Face Hosted).

Distinguished Mentor
asommer
Posts: 755
Registered: ‎08-10-2009
Message 4 of 13 (282 Views)

Re: Attached Duct not moving with Diffuser

09-21-2012 01:18 PM in reply to: asommer

Also, How do you create a video from your Revit?  This would be handy for training...

Product Support
alan.quinn
Posts: 566
Registered: ‎09-08-2010
Message 5 of 13 (264 Views)

Re: Attached Duct not moving with Diffuser

09-24-2012 12:03 PM in reply to: asommer

Same results in that it works. See the below and Jing (its free) is the tool I use for video's.

 

https://dl.dropbox.com/u/11938886/07639255_File_1.rvt

https://dl.dropbox.com/u/11938886/07639255_Video_2.mp4

 

Thank you,

 



Alan Quinn
Support Specialist
Product Support
Autodesk, Inc.
Distinguished Mentor
asommer
Posts: 755
Registered: ‎08-10-2009
Message 6 of 13 (252 Views)

Re: Attached Duct not moving with Diffuser

09-25-2012 09:26 AM in reply to: asommer

I will try the video soon.  I have an area of exposed duct, with exposed sidewall diffusers (No Wall).  I have to place the diffuser on a vertical Reference Plane, not perpendicular like you had it.  Revit will not connect a duct to a diffuser that is hosted to the duct's end.  I place the diffuser on the Vertial Reference Plane, then draw a duct from the diffuser's connector, tapping it into a main duct.  I then move the Reference Plane, noticing the diffuser moves, but the duct does not extend with the diffuser.

 

In the sketch you sent, try moving the wall.  you might see the duct not moving with the diffuser.

Distinguished Mentor
asommer
Posts: 755
Registered: ‎08-10-2009
Message 7 of 13 (246 Views)

Re: Attached Duct not moving with Diffuser

09-25-2012 10:44 AM in reply to: asommer

I Downloaded the Jing and created this... Please see Attached.

Distinguished Mentor
asommer
Posts: 755
Registered: ‎08-10-2009
Message 8 of 13 (243 Views)

Re: Attached Duct not moving with Diffuser

09-25-2012 11:07 AM in reply to: asommer

Sorry, could not Attach SWF or a WMV.  How do you attach anything here?  How did you attach the mp4? It gives me a warning that it is not a supported extension.

Product Support
alan.quinn
Posts: 566
Registered: ‎09-08-2010
Message 9 of 13 (228 Views)

Re: Attached Duct not moving with Diffuser

09-25-2012 04:02 PM in reply to: asommer

You can only attach images. If you have a Dropbox account place the Revit file and video in it and send me the address. Thank you,



Alan Quinn
Support Specialist
Product Support
Autodesk, Inc.
Distinguished Mentor
asommer
Posts: 755
Registered: ‎08-10-2009
Message 10 of 13 (225 Views)

Re: Attached Duct not moving with Diffuser

09-25-2012 04:26 PM in reply to: asommer

I cannot share my Revit file, but I can send you the wmv.  I think this works, I've never used this before.

 

https://www.dropbox.com/sh/n7d1g3sdaslxett/h4drBDAJmQ

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube