Revit Architecture

Reply
New Member
ronmalit
Posts: 2
Registered: ‎08-14-2013
Message 1 of 3 (225 Views)

export IFC

225 Views, 2 Replies
08-14-2013 08:01 PM

hi

i created new crosshead, pile and pilecap using default generic model family and then just change the catergory to my desired family.

my problem now is when i export my ifc,,, and upon checking it, they are now under generic models and not the family category i chose.

is this supposed to happen? kindly help, thanks.

 

using RVT13

tried: 2x3 and coordination view 2.0

 

tried to install exchange apps: ifc exporter for revit 2013 <-- still no change

tried to open and update my file in rvt2014 and do the export ifc there <-- still the same

whats the catch here?

im guessing you cannot use the generic model family and always use the correct family template?

 

http://www.revitcity.com/forums.php?action=viewthread&thread_id=31173

Product Support
yurikim
Posts: 17
Registered: ‎10-19-2012
Message 2 of 3 (145 Views)

Re: export IFC

08-22-2013 10:44 PM in reply to: ronmalit

Thank you for your posting. 

 

I can replicate this issue, and will discuss with QA on it. In case we need your further information, we would contact you directly. 

 

Thanks, 



Yuri Kim
New Member
martijnderiet
Posts: 1
Registered: ‎08-11-2010
Message 3 of 3 (136 Views)

Re: export IFC

08-23-2013 12:16 AM in reply to: yurikim
Check the IFC in an IFC viewer. What IfcClass is it there?
Your problem most likely is that the export or import mapping tables aren't
set correctly (I'd check the import first).

To check the export table go to For export go to R > Export > Options > IFC
Options. Find the IfcClass your element is supposed to be in and see if the
correct import Category is set.
For import go to R > Import > Ifc Settings and do the same.

By the way: you can modify these files for your need and save them.

Kind regards
Met vriendelijke groet,


Martijn de Riet
MdR Advies
With kind regards,


Martijn de Riet
MdR Advies

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube