Revit Architecture

Reply
*ladziuk
Message 1 of 3 (251 Views)

curb component family instruction

251 Views, 2 Replies
11-07-2004 07:59 AM
How it is possible to create Curb Component Family and how to use it on a toposurface? Thanks a lot for support. ladziuk
Distinguished Contributor
Posts: 1,185
Registered: ‎04-04-2002
Message 2 of 3 (251 Views)

Re: curb component family instruction

11-08-2004 05:38 AM in reply to: *ladziuk
Yes, i've made a few, the trick is the entire geometry and "center of geometry" have to be over the toposurf. So straight shots are fine, split your topo at the back side(high side) of the curb and place this family on it, the curved portions are tricky, you may have to have the lower topo surf, extend under the upper one so the center of the curved curb is over the topo surf.
*ladziuk
Message 3 of 3 (251 Views)

Re: curb component family instruction

11-11-2004 04:49 PM in reply to: *ladziuk
Thanks a lot, sdbrown, for your piece of advise, so I`ll try later on ! For a moment I have some problem with my system. Best regards, ladziuk "sdbrown" wrote in message news:18566891.1099921112862.JavaMail.jive@jiveforum2.autodesk.com... > Yes, i've made a few, the trick is the entire geometry and "center of geometry" have to be over the toposurf. So straight shots are fine, split your topo at the back side(high side) of the curb and place this family on it, the curved portions are tricky, you may have to have the lower topo surf, extend under the upper one so the center of the curved curb is over the topo surf.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube