Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
One thing you could do is to raise the "Bottom" offset of the Primary Range settings in the View Range to slightly abovr the top of the sweep.
Michael L. Maloney Virtual World Designs VDC & BIM Model Design, Clash & Coordination mike@VirtualWorldDesigns.com BDSU 2015, 2016 Charlotte, NC ; Fort Mill, SC
We use this wall sweep as skirting of a wall and it was placed at the bottom of the wall. In this case we uses the default view range setting of revit. We have attached the jpg of the view range setting. Can we change this with visibility graphics? If possible then please suggest us.
In the View Range DB, Under "primaryP, try raising the BOTTOM from 0.0000 to something just above the top of the sweep.
Michael L. Maloney Virtual World Designs VDC & BIM Model Design, Clash & Coordination mike@VirtualWorldDesigns.com BDSU 2015, 2016 Charlotte, NC ; Fort Mill, SC
Thank you for the suggestion, but for a typical architectural plan we have to show everything like flooring, door swing, etc including the skirting. We just want to hide the skirting in particular details. By following your suggestion, the flooring is getting hidden as well. Kindly review and suggest.
