Revit Architecture

Reply
Active Contributor
oihadsf
Posts: 27
Registered: ‎06-09-2005
Message 1 of 4 (1,128 Views)
Accepted Solution

Wall Sweep to Follow Wall Profile

1128 Views, 3 Replies
04-12-2012 01:17 PM

Hello All,

I was wondering if there is a way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed.  For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet.  How do i get my wall cap to follow along?  I thought splitting it and changing it's height would work, but no.  And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.  I have no idea how to do this and any help would be greatly appreciated.

Angled Wall.jpg 
Thanks,
~Wes~

*Expert Elite*
ccollins
Posts: 866
Registered: ‎09-28-2009
Message 2 of 4 (1,127 Views)

Re: Wall Sweep to Follow Wall Profile

04-12-2012 01:21 PM in reply to: oihadsf

You can't use a built-in sweep on a Profile Edited wall.

 

You can use an in-place family, or a Roof by Extrusion as an alternative method.

 

You might also try using a Line-Based Family, with a loaded Profile.

Cliff B. Collins
Registered Architect/BIM Manager
Thalden Boyd Emery Architects
St. Louis, MO
Active Contributor
oihadsf
Posts: 27
Registered: ‎06-09-2005
Message 3 of 4 (1,123 Views)

Re: Wall Sweep to Follow Wall Profile

04-12-2012 01:25 PM in reply to: ccollins

Cliff,

Thanks for the quick response.  I was afraid that would be the answer.  I'll look into the other options you've posted and give them a try.

 

Thanks,

~Wes~ 

Valued Contributor
sgoodmansen
Posts: 59
Registered: ‎11-13-2006
Message 4 of 4 (1,018 Views)

Re: Wall Sweep to Follow Wall Profile

05-09-2012 03:24 PM in reply to: oihadsf

In-place families work really well for this situation.  I think The Revit Kid had a different method on his blog using reference planes, but in-place families are super easy.  Only advantage to his method was the sweep actually changed when the reference plane changed, but its a lot of work and I never got it to work successfully myself.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube