Revit Architecture

Reply
New Member
dbmargojones
Posts: 2
Registered: ‎09-04-2012
Message 1 of 4 (150 Views)

Vuiew Range and Room Fills

150 Views, 3 Replies
09-04-2012 07:02 AM

I have a thirdf floor view that continues to show the 2nd floor room fill colors, despite the fact that underlay is off.  Floor 3 is visible and present (though) I can't grab it because I don't cotnrol that work set.  The third floor room fill is not visible unless I make the cut plane 10'.  That suggests that the 3rd floor is out of place, I think.  But it seems fine in section.

 

I can't figure out if this is a bug in the view range or a problem in the model.

 

Help?  Suggestions?

 

Note that the upper range is 12'2"

The bottom of the range is offset 4' to show a parapet/roof of an adjoining structure.

The clip depth is not effecting the visibility of the 2nd floor room fills at all, though it does effect the 3rd objects like the parapet.

 

I would think the clip depth would get rid of a lower floors room fill, which I assume is associated with the floor object.

Product Support
fernanda.firman
Posts: 160
Registered: ‎10-07-2011
Message 2 of 4 (114 Views)

Re: Vuiew Range and Room Fills

09-17-2012 02:29 PM in reply to: dbmargojones

Can you post your file and some images?

If you go to a section cutting one of those rooms and check the room itself, can you confirm that the rooms are going from the bottom of the floors to the ceilings?



Fernanda Lima Firman
Technical Support Specialist
Customer Service & Support
Autodesk, Inc.

Revit Clinic


If this helped solve your issue - remember to 'accept as solution' to help others find answers.
New Member
dbmargojones
Posts: 2
Registered: ‎09-04-2012
Message 3 of 4 (111 Views)

Re: Vuiew Range and Room Fills

09-17-2012 02:38 PM in reply to: fernanda.firman
I figured it out, thanks. The room tag also establishes an elevation and top setting. I had not realized that. Thanks, Dorrie Dorrie Brooks Intern Architect ___________________ M A R G O J O N E S Architects 308 Main Street, 3rd Floor Greenfield, MA 01301 T. 413-773-5551 F. 413-773-5552
Product Support
fernanda.firman
Posts: 160
Registered: ‎10-07-2011
Message 4 of 4 (109 Views)

Re: Vuiew Range and Room Fills

09-17-2012 02:39 PM in reply to: dbmargojones

Glad to hear you got it working!



Fernanda Lima Firman
Technical Support Specialist
Customer Service & Support
Autodesk, Inc.

Revit Clinic


If this helped solve your issue - remember to 'accept as solution' to help others find answers.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube