Hi , everyone!
Please tell me how can I make the bottom of stair to flat instead of steps?
Willie
Solved! Go to Solution.
Solved by huangq. Go to Solution.
Please try this:
1:select your stair;
2:Click at Edit Type in Properties palette;
3:In Type Properties, check Monolithic Stairs and set Underside Of Winder to Smooth.
Please view the JPG for reference.
______________________________________________________________
If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!
Thanks! one more question about stair: this is a rooml under the stair,can I use "attach top/base" to make room walls attach to bottom of stair?
Starit or Ramp could not be adopted to attach top/base for a wall in Revit. Currently, we can create a Model-In-Plase roof component beneath the stair/ramp. For example, for a spiral stair, you can create a roof by Sweep feature, and by picking stair edges as the path for sweeping. After roof is modeled, you can attach top/base of the wall to the roof.
Sorry. It would be better to post your question here. I might not be able to reply immediately due to my own work. There are many people who could help you in this discussion group.