Setting the height of the masonry stone,
I couldn’t figure out how the height of the masonry stone can be set.
For example, in the attached screenshot, I wanted the height to be 0.26 meter then how this can be done?
Please do your own hatch pattern using http://mertens3d.com/tools/revit/2012/hatch22-2012
If you're importing a custom .pat hatch, then you have two choices.
1- modify the .pat file itself to get the correct results.
2- After importing to revit, check the dimensions. If you need say 100 mm and it is 50 mm, then reimport the same .pat file and put 100/50 = 2 in the scale prompt. It will then multiply the pattern by 2.
Many thanks guys for the help,
I thought that there might be simple way to do this as all what I need is to have the same hatch built in the revit but with different height! That’s all.
I got the link below that requires using third party software to manufacture *.pat files
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.