when I try to install revit server 2012, I get an error "there is a problem with this windows installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor.
When I check the install log, it has this error:
"InstallRevit ServerFailedInstallation aborted, Result=1603"
This is on a server 2008 R2 and all prerequisites have been installed. Anybody experienced this problem before?
A few things may be causing this. See this link and pay particular attention to #1: http://revitclinic.typepad.com/my_weblog/2011/05/3
Thanks for posting.
thanks for the reply.
Indeed we are running the setup this way and I double checked prerequisites
After googling, I tried solutions from the following links, but non of these files/reg keys are present
I checked the anitvirus logs: nothing is being blocked. I also tried to run the setup on a test server with an identical antivirus / group policy and there the installer runs fine so I've excluded anitvirus / group policy.
I deleted everything in the %temp% folder
Disabled UAC, no success either.
Really stuck here...
Installed 2008R2 Service pack 1 but unfortunately the installer still errors out
Could it be a problem that LMTools is already installed/running on this server or that Revit is not installed?
Even our vendor has run out of ideas...
I asked our Revit Server lead to take a look at this one. I will update when I hear back from him.
Sorry for the delay in getting back to you. We have a meeting this afternoon and I will be brining up this case. I'll let you know what I find out.
Try the following:
 Clear out %temp%
 Run the RS install again
If you still have issue
 Collect everything in %temp% and send to ADSK for further analysis. (We'll figure out how to do this later)
Start with some of our most frequented solutions to get help installing your software.