Revit Architecture

Reply
*Daniel Legarraga
Message 11 of 14 (48 Views)

Re: Revit Books

07-28-2004 03:25 PM in reply to: *Stan Fowler
Scott, I can not open and or save the file...any suggestion? Daniel "Scott Davis" escribió en el mensaje news:41080a5d_1@newsprd01... > www.augi.com > > If you are a member of AUGI already, try: > > http://forums.augi.com/showthread.php?t=6082 > > (if not you can sign up for free at the URL above) > > > "Daniel Legarraga" wrote in message > news:4107fbd2_2@newsprd01... > > Any suggestion of where find Appendix A omitted in the book (just a few > > blank pages...). > > > > Daniel > > > > "Jim Balding" escribió en el mensaje > > news:40f70381$1_3@newsprd01... > > > Just to clear the air. There was never an edition published for 5.5. > > There > > > was never a Revit 5.5. The Autodesk Press book was written during the > 5.1 > > > release and updated for 6.0/6.1. The cover shot was the original image > > and > > > was distributed sometime in the 2nd quarter of 2003, and that is why > there > > > is so much confusion. > > > > > > Sorry - > > > > > > > > > "Daniel Legarraga" wrote in message > > > news:40f6b952$1_2@newsprd01... > > > > The title book is "Introducing and Implementing Autodesk Revit 5.5" > > first > > > > edition June 29, 2004. > > > > I wonder if it's updated for Revit 6.1? or we will wait for the > edition > > > > 7/8/2004. > > > > On Amazon the book is priced $33.97. > > > > > > > > Daniel > > > > > > > > "Jim Balding" escribió en el mensaje > > > > news:40f458c9$1_2@newsprd01... > > > > > David - > > > > > > > > > > I was refering to the Autodesk Press book and it is out now. > > > > > > > > > > > > > > > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=1401850499. > > > > > Sorry for the confusion > > > > > > > > > > - JB > > > > > > > > > > > > > > > "David Driver" wrote in message > > > > > news:40ddf517$1_3@newsprd01... > > > > > > hmmm...still working on it even as we speak > > > > > > 7/8 might be a bit optimistic (only a bit...) > > > > > > David Driver, Contributing Editor CDV Revit Courseware Series > > > > > > > > > > > > "Jim Balding" wrote in message > > > > > > news:40ce63b4$1_1@newsprd01... > > > > > > > Stan - > > > > > > > > > > > > > > That book has now been updated for Revit 6 and will be out > > shortly. > > > > The > > > > > > > target date on the web site is now 7/8/2004. > > > > > > > > > > > > > > - JB > > > > > > > > > > > > > > "Stan Fowler" wrote in message > > > > > > > news:40bf9f82$1_2@newsprd01... > > > > > > > > I was wondering when some decent books will come out for > Revit. > > > > > > > > A book by Autodesk Press has been listed for a year and is > > titled > > > > > > > > Implementing Revit 5.5 but has not been published. I am > > surprised > > > > > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
*Scott Davis
Message 12 of 14 (48 Views)

Re: Revit Books

07-28-2004 05:19 PM in reply to: *Stan Fowler
I e-mailed it to you. Let me know if it works for you. "Daniel Legarraga" wrote in message news:410827df_1@newsprd01... > Scott, > I can not open and or save the file...any suggestion? > Daniel > > "Scott Davis" escribió en el mensaje > news:41080a5d_1@newsprd01... > > www.augi.com > > > > If you are a member of AUGI already, try: > > > > http://forums.augi.com/showthread.php?t=6082 > > > > (if not you can sign up for free at the URL above) > > > > > > "Daniel Legarraga" wrote in message > > news:4107fbd2_2@newsprd01... > > > Any suggestion of where find Appendix A omitted in the book (just a few > > > blank pages...). > > > > > > Daniel > > > > > > "Jim Balding" escribió en el mensaje > > > news:40f70381$1_3@newsprd01... > > > > Just to clear the air. There was never an edition published for 5.5. > > > There > > > > was never a Revit 5.5. The Autodesk Press book was written during the > > 5.1 > > > > release and updated for 6.0/6.1. The cover shot was the original > image > > > and > > > > was distributed sometime in the 2nd quarter of 2003, and that is why > > there > > > > is so much confusion. > > > > > > > > Sorry - > > > > > > > > > > > > "Daniel Legarraga" wrote in message > > > > news:40f6b952$1_2@newsprd01... > > > > > The title book is "Introducing and Implementing Autodesk Revit 5.5" > > > first > > > > > edition June 29, 2004. > > > > > I wonder if it's updated for Revit 6.1? or we will wait for the > > edition > > > > > 7/8/2004. > > > > > On Amazon the book is priced $33.97. > > > > > > > > > > Daniel > > > > > > > > > > "Jim Balding" escribió en el mensaje > > > > > news:40f458c9$1_2@newsprd01... > > > > > > David - > > > > > > > > > > > > I was refering to the Autodesk Press book and it is out now. > > > > > > > > > > > > > > > > > > > > > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=1401850499. > > > > > > Sorry for the confusion > > > > > > > > > > > > - JB > > > > > > > > > > > > > > > > > > "David Driver" wrote in message > > > > > > news:40ddf517$1_3@newsprd01... > > > > > > > hmmm...still working on it even as we speak > > > > > > > 7/8 might be a bit optimistic (only a bit...) > > > > > > > David Driver, Contributing Editor CDV Revit Courseware Series > > > > > > > > > > > > > > "Jim Balding" wrote in message > > > > > > > news:40ce63b4$1_1@newsprd01... > > > > > > > > Stan - > > > > > > > > > > > > > > > > That book has now been updated for Revit 6 and will be out > > > shortly. > > > > > The > > > > > > > > target date on the web site is now 7/8/2004. > > > > > > > > > > > > > > > > - JB > > > > > > > > > > > > > > > > "Stan Fowler" wrote in message > > > > > > > > news:40bf9f82$1_2@newsprd01... > > > > > > > > > I was wondering when some decent books will come out for > > Revit. > > > > > > > > > A book by Autodesk Press has been listed for a year and is > > > titled > > > > > > > > > Implementing Revit 5.5 but has not been published. I am > > > surprised > > > > > > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
*Jim Balding
Message 13 of 14 (48 Views)

Re: Revit Books

07-28-2004 08:44 PM in reply to: *Stan Fowler
The file has some PDF security features in place. You will need Acrobat Reader 5.0 or greater to access the file. You can download 6.0 for free at www.adobe.com HTH - - JB "Scott Davis" wrote in message news:410841b7$1_3@newsprd01... > I e-mailed it to you. Let me know if it works for you. > > "Daniel Legarraga" wrote in message > news:410827df_1@newsprd01... > > Scott, > > I can not open and or save the file...any suggestion? > > Daniel > > > > "Scott Davis" escribió en el mensaje > > news:41080a5d_1@newsprd01... > > > www.augi.com > > > > > > If you are a member of AUGI already, try: > > > > > > http://forums.augi.com/showthread.php?t=6082 > > > > > > (if not you can sign up for free at the URL above) > > > > > > > > > "Daniel Legarraga" wrote in message > > > news:4107fbd2_2@newsprd01... > > > > Any suggestion of where find Appendix A omitted in the book (just a > few > > > > blank pages...). > > > > > > > > Daniel > > > > > > > > "Jim Balding" escribió en el mensaje > > > > news:40f70381$1_3@newsprd01... > > > > > Just to clear the air. There was never an edition published for 5.5. > > > > There > > > > > was never a Revit 5.5. The Autodesk Press book was written during > the > > > 5.1 > > > > > release and updated for 6.0/6.1. The cover shot was the original > > image > > > > and > > > > > was distributed sometime in the 2nd quarter of 2003, and that is why > > > there > > > > > is so much confusion. > > > > > > > > > > Sorry - > > > > > > > > > > > > > > > "Daniel Legarraga" wrote in message > > > > > news:40f6b952$1_2@newsprd01... > > > > > > The title book is "Introducing and Implementing Autodesk Revit > 5.5" > > > > first > > > > > > edition June 29, 2004. > > > > > > I wonder if it's updated for Revit 6.1? or we will wait for the > > > edition > > > > > > 7/8/2004. > > > > > > On Amazon the book is priced $33.97. > > > > > > > > > > > > Daniel > > > > > > > > > > > > "Jim Balding" escribió en el mensaje > > > > > > news:40f458c9$1_2@newsprd01... > > > > > > > David - > > > > > > > > > > > > > > I was refering to the Autodesk Press book and it is out now. > > > > > > > > > > > > > > > > > > > > > > > > > > > > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=14018 50499. > > > > > > > Sorry for the confusion > > > > > > > > > > > > > > - JB > > > > > > > > > > > > > > > > > > > > > "David Driver" wrote in message > > > > > > > news:40ddf517$1_3@newsprd01... > > > > > > > > hmmm...still working on it even as we speak > > > > > > > > 7/8 might be a bit optimistic (only a bit...) > > > > > > > > David Driver, Contributing Editor CDV Revit Courseware Series > > > > > > > > > > > > > > > > "Jim Balding" wrote in message > > > > > > > > news:40ce63b4$1_1@newsprd01... > > > > > > > > > Stan - > > > > > > > > > > > > > > > > > > That book has now been updated for Revit 6 and will be out > > > > shortly. > > > > > > The > > > > > > > > > target date on the web site is now 7/8/2004. > > > > > > > > > > > > > > > > > > - JB > > > > > > > > > > > > > > > > > > "Stan Fowler" wrote in message > > > > > > > > > news:40bf9f82$1_2@newsprd01... > > > > > > > > > > I was wondering when some decent books will come out for > > > Revit. > > > > > > > > > > A book by Autodesk Press has been listed for a year and is > > > > titled > > > > > > > > > > Implementing Revit 5.5 but has not been published. I am > > > > surprised > > > > > > > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
*Daniel Legarraga
Message 14 of 14 (48 Views)

Re: Revit Books

07-29-2004 07:35 AM in reply to: *Stan Fowler
Jim, OK I open it with Adobe 6.0 and congratulation for the book, It's a very good job. Daniel . "Jim Balding" escribió en el mensaje news:410872b2$1_3@newsprd01... > The file has some PDF security features in place. You will need Acrobat > Reader 5.0 or greater to access the file. You can download 6.0 for free at > www.adobe.com > > HTH - > > - JB > > "Scott Davis" wrote in message > news:410841b7$1_3@newsprd01... > > I e-mailed it to you. Let me know if it works for you. > > > > "Daniel Legarraga" wrote in message > > news:410827df_1@newsprd01... > > > Scott, > > > I can not open and or save the file...any suggestion? > > > Daniel > > > > > > "Scott Davis" escribió en el mensaje > > > news:41080a5d_1@newsprd01... > > > > www.augi.com > > > > > > > > If you are a member of AUGI already, try: > > > > > > > > http://forums.augi.com/showthread.php?t=6082 > > > > > > > > (if not you can sign up for free at the URL above) > > > > > > > > > > > > "Daniel Legarraga" wrote in message > > > > news:4107fbd2_2@newsprd01... > > > > > Any suggestion of where find Appendix A omitted in the book (just a > > few > > > > > blank pages...). > > > > > > > > > > Daniel > > > > > > > > > > "Jim Balding" escribió en el mensaje > > > > > news:40f70381$1_3@newsprd01... > > > > > > Just to clear the air. There was never an edition published for > 5.5. > > > > > There > > > > > > was never a Revit 5.5. The Autodesk Press book was written during > > the > > > > 5.1 > > > > > > release and updated for 6.0/6.1. The cover shot was the original > > > image > > > > > and > > > > > > was distributed sometime in the 2nd quarter of 2003, and that is > why > > > > there > > > > > > is so much confusion. > > > > > > > > > > > > Sorry - > > > > > > > > > > > > > > > > > > "Daniel Legarraga" wrote in message > > > > > > news:40f6b952$1_2@newsprd01... > > > > > > > The title book is "Introducing and Implementing Autodesk Revit > > 5.5" > > > > > first > > > > > > > edition June 29, 2004. > > > > > > > I wonder if it's updated for Revit 6.1? or we will wait for the > > > > edition > > > > > > > 7/8/2004. > > > > > > > On Amazon the book is priced $33.97. > > > > > > > > > > > > > > Daniel > > > > > > > > > > > > > > "Jim Balding" escribió en el mensaje > > > > > > > news:40f458c9$1_2@newsprd01... > > > > > > > > David - > > > > > > > > > > > > > > > > I was refering to the Autodesk Press book and it is out now. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=14018 > 50499. > > > > > > > > Sorry for the confusion > > > > > > > > > > > > > > > > - JB > > > > > > > > > > > > > > > > > > > > > > > > "David Driver" wrote in message > > > > > > > > news:40ddf517$1_3@newsprd01... > > > > > > > > > hmmm...still working on it even as we speak > > > > > > > > > 7/8 might be a bit optimistic (only a bit...) > > > > > > > > > David Driver, Contributing Editor CDV Revit Courseware > Series > > > > > > > > > > > > > > > > > > "Jim Balding" wrote in message > > > > > > > > > news:40ce63b4$1_1@newsprd01... > > > > > > > > > > Stan - > > > > > > > > > > > > > > > > > > > > That book has now been updated for Revit 6 and will be out > > > > > shortly. > > > > > > > The > > > > > > > > > > target date on the web site is now 7/8/2004. > > > > > > > > > > > > > > > > > > > > - JB > > > > > > > > > > > > > > > > > > > > "Stan Fowler" wrote in message > > > > > > > > > > news:40bf9f82$1_2@newsprd01... > > > > > > > > > > > I was wondering when some decent books will come out for > > > > Revit. > > > > > > > > > > > A book by Autodesk Press has been listed for a year and > is > > > > > titled > > > > > > > > > > > Implementing Revit 5.5 but has not been published. I am > > > > > surprised > > > > > > > > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube