Revit Architecture

Reply
Active Member
dmc-az
Posts: 7
Registered: ‎08-10-2010
Message 1 of 8 (389 Views)
Accepted Solution

Problems with Shared Parameters

389 Views, 7 Replies
04-22-2012 12:28 PM

I have a wall type tag that I have created with a shared parameter that is a text option that can be added to the wall type number such as an 'A' to wall type 1 becoming a Wall Type '1A'.  It is an instance parameter and a shared parameter that shows up in the shared parameters undera  'Wall Type Options' Group.

 

This is the problem:  Everytime I start to tag walls the wall type option is grayed out and uneditable.  I have screwed around with it before to finally get it editable, but no logical sequence seems towork twice in a row.

 

using Revit 2012.  any assistance would be appreciated.

 

thx

doug

*Expert Elite*
Alfredo_Medina
Posts: 2,813
Registered: ‎06-11-2009
Message 2 of 8 (383 Views)

Re: Problems with Shared Parameters

04-22-2012 01:19 PM in reply to: dmc-az

dmc-az wrote: 
...Everytime I start to tag walls the wall type option is grayed out and uneditable. ..

Can you explain that part?

-----------------------------------------------------------------------------------------------------------------
Planta1 Revit Online Consulting | info@planta1.com | my Twitter | The Planta1 Blog
Active Member
dmc-az
Posts: 7
Registered: ‎08-10-2010
Message 3 of 8 (379 Views)

Re: Problems with Shared Parameters

04-22-2012 01:28 PM in reply to: Alfredo_Medina

I add a wall tag,  click to add the value for the Wall Type Option, the dialogue box pops up,  but the wall type option parameter iis grayed out (i.e. uneditable) and I cannot insert a value.

*Expert Elite*
Alfredo_Medina
Posts: 2,813
Registered: ‎06-11-2009
Message 4 of 8 (367 Views)

Re: Problems with Shared Parameters

04-22-2012 02:30 PM in reply to: dmc-az

dmc-az wrote:

I add a wall tag,  click to add the value for the Wall Type Option, the dialogue box pops up,  but the wall type option parameter iis grayed out (i.e. uneditable) and I cannot insert a value.


Sorry, I don't understand that sequence. Which "dialog box pops up" when placing wall tags?

-----------------------------------------------------------------------------------------------------------------
Planta1 Revit Online Consulting | info@planta1.com | my Twitter | The Planta1 Blog
Active Member
dmc-az
Posts: 7
Registered: ‎08-10-2010
Message 5 of 8 (363 Views)

Re: Problems with Shared Parameters

04-22-2012 03:23 PM in reply to: Alfredo_Medina

attached is the dialogue box

Active Member
dmc-az
Posts: 7
Registered: ‎08-10-2010
Message 6 of 8 (361 Views)

Re: Problems with Shared Parameters

04-22-2012 03:31 PM in reply to: dmc-az

I figured it out:

 

Go to manage>Project Parameters

Click Add – Select the name of the ‘Shared parameter’ from the list and make it available to walls

It then shows up as editable in the Wall Tag

 

thanks for responding to the post!

*Expert Elite*
Alfredo_Medina
Posts: 2,813
Registered: ‎06-11-2009
Message 7 of 8 (346 Views)

Re: Problems with Shared Parameters

04-22-2012 04:06 PM in reply to: dmc-az

Ah, OK, the confusion was because of these 2 things:

 

1) usually, values in tags are entered in the properties dialog box (instance or type) of the object being tagged, not in that dialog that you show, UNLESS the tag contains a group of parameters in the same label; when the tag has different labels with individual parameters, that dialog box is not available.

 

2) You said that you were doing a "click to add the value" , when it is actually a "double click" what opens that kind of dialog box when a tag contains one single label with multiple parameters.

 

About the parameter, yes, if you create a shared parameter and want to use it in a project, you need to create a project parameter, and specify a category; otherwise, the project does not "know" that you create a shared parameter, or where to apply it.

-----------------------------------------------------------------------------------------------------------------
Planta1 Revit Online Consulting | info@planta1.com | my Twitter | The Planta1 Blog
Mentor
parveen.revit
Posts: 232
Registered: ‎09-29-2010
Message 8 of 8 (327 Views)

Re: Problems with Shared Parameters

04-22-2012 09:29 PM in reply to: Alfredo_Medina

and it is important that you choose right category (wall in this case) while addint project paramter.

 

 

Parveen_Intec_Infocom (BIM, CAD, GIS, QS Services' Provider)

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube