Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Jamping Jack Flash

3 REPLIES 3
Reply
Message 1 of 4
DavidRaines
268 Views, 3 Replies

Jamping Jack Flash

Yesterday morning I discovered that when I clicked on a wall. text or anything that element would jump up on the screen.

Has anyone experienced this?

 

Thanks

David

3 REPLIES 3
Message 2 of 4

David,

Ive noticed this on on ocasion when the extents of your model has be exceeded. error.JPG

 

Check that your not getting this error, and also that your Project base point isnt too far away from the centre of your project.

Message 3 of 4

Hi David,

 

This type of issue is usualy realted to graphic cards.

 

Here are some things to try:

1. Update your graphic card

http://usa.autodesk.com/adsk/servlet/syscert?siteID=123112&id=18844534

2. Make sure you have the latest update for Revit

3. Turn off Hardware Accelaration - Go to the big "R" on the top left>Options>Graphics

4. Use Revit on the primary monitor , if you are using dual monitor.

 

Hope that helps!

 



Fernanda Lima Firman
Technical Support Specialist
Customer Service & Support
Autodesk, Inc.

Revit Clinic


If this helped solve your issue - remember to 'accept as solution' to help others find answers.
Message 4 of 4
kentw
in reply to: DavidRaines

The easy fix for this issue is to un-tick the press and drag tick box down the very bottom right of the application screen. You will still get a flicker but the selected objects will not move. After un-ticking this box when you want to drag something you need to click to select then click and drag.
_________________________________________________________________

KarelCAD Application Support Specialist

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report