Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Issues with the View Property of "Detail" Callouts

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
JustBrev
2786 Views, 3 Replies

Issues with the View Property of "Detail" Callouts

the problem:

structural column is not visible in detail callout when detail level is set to medium or fine.

 

the situation:

I am taking a detail view"detail" callout of my building envelope in Revit Architecture 2012. I have applied view template "Architectural Section" with structural column box ticked. Detail level set to Medium, and proper scale chosen.

 

other facts:

the visibility settings of the structual column family are ticked for visiblity in plan view & when cut in plan/rcp at all detail levels.

the column is visible in the above sinario when detail level is set to coarse.

 

the question:

what else would effect this sturctural columns visibiliy in the "detail"callout ,only?

3 REPLIES 3
Message 2 of 4
vector2
in reply to: JustBrev

Let's do this through a process of elimination.

 

Is the callout tag outside of the parent view’s
crop region?

 

Did you check the "Hide at scales coarser than"?

 

Just for starters.

Message 3 of 4
JustBrev
in reply to: vector2

maybe I was not able to make the problem clear.

 

see images >

 

the issue is not visibility of the callout, the problem is the visibility of the structural column within the view.

 

 

Message 4 of 4
ccollins
in reply to: JustBrev

This is a known issue.

 

Try recreating the view as a Floor Plan Callout, and the structural column should appear.

 

Also, open the column family and make sure that "show pre-cut in plan views" is checked.

 

See attached.

Cliff B. Collins
Registered Architect/BIM Manager
Thalden Boyd Emery Architects
St. Louis, MO

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report