Revit Architecture

Reply
Member
lucilarosso
Posts: 4
Registered: ‎01-18-2012
Message 1 of 17 (20,703 Views)
Accepted Solution

How to determine the total length of multiple lines

20703 Views, 16 Replies
01-18-2012 10:47 AM

This is something that used to be very easy to do in autocad (with a polyline) and checking the lenght on the properties bar.

When I select multiple lines (chain of lines) the "lenght" data is greyed out.

I hate having to measure every segment separately! It has to be easier... right?

 

 

Employee
davissc
Posts: 292
Registered: ‎08-08-2007
Message 2 of 17 (20,693 Views)

Re: How to determine the total length of multiple lines

01-18-2012 11:47 AM in reply to: lucilarosso

use the Measure tool, using measure between two elements, ad check on the Chain option in the Options bar.



Scott D Davis
AEC Technical Specialist
North American Sales
Autodesk, Inc.

Want Revit Content? Go to http://seek.autodesk.com !

*Expert Elite*
Alfredo_Medina
Posts: 2,814
Registered: ‎06-11-2009
Message 3 of 17 (20,691 Views)

Re: How to determine the total length of multiple lines

01-18-2012 11:59 AM in reply to: lucilarosso

Or, maybe faster, without checking Chain, is: Measure > Measure Along an Element. Hover the mouse over the first item, hit the tab key, and click. The result of the total length would be in the options bar.

-----------------------------------------------------------------------------------------------------------------
Planta1 Revit Online Consulting | info@planta1.com | my Twitter | The Planta1 Blog
Member
lucilarosso
Posts: 4
Registered: ‎01-18-2012
Message 4 of 17 (20,681 Views)

Re: How to determine the total length of multiple lines

01-18-2012 12:25 PM in reply to: Alfredo_Medina

It seems that both solutions involve measuring again everytime the chain of lines are modified. Not ideal to me.

A friend suggested using a spline line with a very tight radius at the corner- it generates an overall lenght on the properties. Seems to be working. Thanks!

 

*Expert Elite*
Alfredo_Medina
Posts: 2,814
Registered: ‎06-11-2009
Message 5 of 17 (20,670 Views)

Re: How to determine the total length of multiple lines

01-18-2012 12:54 PM in reply to: lucilarosso

Not a good advice from your friend. Splines have other issues. Have you tried to use Trim/Extend with splines? You are creating a new set of issues for not doing one extra click with the Measure tool.

-----------------------------------------------------------------------------------------------------------------
Planta1 Revit Online Consulting | info@planta1.com | my Twitter | The Planta1 Blog
*Expert Elite*
rosskirby
Posts: 813
Registered: ‎04-08-2008
Message 6 of 17 (20,657 Views)

Re: How to determine the total length of multiple lines

01-18-2012 02:03 PM in reply to: lucilarosso

Can you tell us specifically what you're trying to measure?  If it's path of travel, then I'd recommend using a line-based generic model element, and then generating a schedule that stays up-to-date with the total length.  If it's something else, there might be a better way, but it's hard to say without knowing exactly what you're doing.

Ross Kirby
BIM Manager
Arcturis
Member
lucilarosso
Posts: 4
Registered: ‎01-18-2012
Message 7 of 17 (20,648 Views)

Re: How to determine the total length of multiple lines

01-18-2012 03:08 PM in reply to: lucilarosso

Correct: I am trying to measure a path of travel.

What you are suggesting sounds quite complex ....  Wonder whether I might as well measure every line instead.

But if not too much trouble, I am curious to hear more.

 

*Expert Elite*
Alfredo_Medina
Posts: 2,814
Registered: ‎06-11-2009
Message 8 of 17 (20,638 Views)

Re: How to determine the total length of multiple lines

01-18-2012 08:38 PM in reply to: lucilarosso

Then the proper question to start this thread with was "How to create and measure an egress path?" instead of "How to determine the total length of multiple lines?"

-----------------------------------------------------------------------------------------------------------------
Planta1 Revit Online Consulting | info@planta1.com | my Twitter | The Planta1 Blog
*Expert Elite*
rosskirby
Posts: 813
Registered: ‎04-08-2008
Message 9 of 17 (20,629 Views)

Re: How to determine the total length of multiple lines

01-19-2012 05:55 AM in reply to: lucilarosso

It's actually not that hard, even though it sounds a little complicated.  The method I use is shamelessly stolen from Steve Stafford's blog, where he provides the families and schedules you'll need to get the job done.

 

http://revitoped.blogspot.com/2007/01/egress-path.html

Ross Kirby
BIM Manager
Arcturis
Member
lucilarosso
Posts: 4
Registered: ‎01-18-2012
Message 10 of 17 (20,622 Views)

Re: How to determine the total length of multiple lines

01-19-2012 06:45 AM in reply to: rosskirby

Thanks! I'll give it a try.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube