Revit Architecture

Reply
Active Contributor
chris.pitt
Posts: 35
Registered: ‎06-29-2005
Message 1 of 5 (169 Views)

Door "Bounding Box?"

169 Views, 4 Replies
09-27-2012 02:42 AM

Hi

 

I'm having fun with doors!

 

I've made a very simple industrial door which works fine but has one oddity.  That is, when I try to move one it has a huge blue dashed box appear around it (see attached image).  When I do the same with a standard family the box is quite tight around the door (see second attached image).

 

When I look at the family and zoom extents in all views I can't see any geometry lurking a long way from the model.  That said, I am concerned that they may be affecting the extents of the building model.

 

Any thoughts?

 

Regards

 

Christopher Alan Pitt

Frank Shaw Associates

Mentor
mike
Posts: 237
Registered: ‎03-04-2004
Message 2 of 5 (160 Views)

Re: Door "Bounding Box?"

09-27-2012 05:31 AM in reply to: chris.pitt

Try checking the Reference planes lengths in your door family............they may be quite long.

 

Mike

Michael L. Maloney
Virtual World Designs
VDC & BIM Model Design, Clash & Coordination
mike@VirtualWorldDesigns.com
Building Design Suite Ultimate 2013, 2014, 2015
Charlotte, NC ; Fort Mill, SC
Active Contributor
chris.pitt
Posts: 35
Registered: ‎06-29-2005
Message 3 of 5 (127 Views)

Re: Door "Bounding Box?"

09-28-2012 01:16 AM in reply to: mike

Thanks for the reply.

 

It doesn't appear to be the case.  Whilst I introduced additional planes I didn't tweak the predefined ones and the additional planes don't extend beyond them.

 

Regards

 

Christopher Alan Pitt

Frank Shaw Associates

Mentor
mike
Posts: 237
Registered: ‎03-04-2004
Message 4 of 5 (119 Views)

Re: Door "Bounding Box?"

09-28-2012 04:29 AM in reply to: chris.pitt

Any dim parameters or Labels way out?  Without looking at the family, those would be my choices to check out.

 

HTH

 

Mike

Michael L. Maloney
Virtual World Designs
VDC & BIM Model Design, Clash & Coordination
mike@VirtualWorldDesigns.com
Building Design Suite Ultimate 2013, 2014, 2015
Charlotte, NC ; Fort Mill, SC
Active Contributor
chris.pitt
Posts: 35
Registered: ‎06-29-2005
Message 5 of 5 (108 Views)

Re: Door "Bounding Box?"

09-28-2012 08:07 AM in reply to: mike

I've had another look and still can't see anything.

 

I've rebuilt the doors from scratch and they're seem fine (completely new families).  All good practice!

 

Regards

 

Christopher Alan Pitt

Frank Shaw Associates

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube