Is there a way to demolish (new construction) an opening into a wall that is an existing phase (existing wall)?
Help would be greatly appreciate...
Unfortunately, you can't yet demolish a part of something, only the whole thing. So go into an existing phase elevation view of your existing wall, edit the profile to create the opening where you want it. Then, in an existing phase plan view, draw a new "infill" wall of the same type as the existing wall, and demolish that "infill" wall in the new construction phase. Kind of clunky, but it works.
There is a door category that is simply that, just an opening. The down side is that they will then schedule , so you need to filter them out. It is exactly like placing a door, just no frames etc. We use a type mark in our openings and filter them from the schedule that way. Create your existing wall as it is built, then in your new work phase, place the opening family, viola, new opening in an existing wall. No need to fake it.
You need to create a generic wall based family and create a parametric opening. I attached the family file which may help who has similar issue
This issue should be resolved in the next release. This is a very important part of retrofit and construction drawings. Idealy, when inserting a new door in an existing wall, demolition lines should be automatically created in the demo phase.
That is what happens when you insert a family into an existing wall. The problem the OP was having is that when inserting openings, or when in need of demolishing a part of a wall, you have do a bit more work.
You have two options:
Hope that helps.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register