QuickCAD

Reply
*Hashmy, Christel Al
Message 1 of 3 (21 Views)

insufficient memory

21 Views, 2 Replies
03-08-2000 03:32 AM
After working with Quickcad for approx an hour, the screen starts to go
black and white , followed by "insufficient memory" warning. My version is
3.02. I have 64 RAM installed and a large hard disk and never run any other
program at the same time. Can anybody help?
Charles Sappa
*Smith, Harvey
Message 2 of 3 (21 Views)

Re: insufficient memory

03-10-2000 03:24 PM in reply to: *Hashmy, Christel Al
Christal,

There's a few things to fiddle with maybe. Check the
connectors on the back of both the monitor and the video
card. You might even want to open the computer and reseat
the card. If this were actually a problem, you probably
would see the same effect with other programs.

Also, check to make sure you have the latest video drivers
installed.

Lastly, try reinstalling the program with no active programs
running in the background, including virus protection.

Stay tuned for other suggestions.

This sounds like a system problem rather than a QC problem.

H

Christel Al Hashmy wrote:
>
> After working with Quickcad for approx an hour, the screen starts to go
> black and white , followed by "insufficient memory" warning. My version is
> 3.02. I have 64 RAM installed and a large hard disk and never run any other
> program at the same time. Can anybody help?
> Charles Sappa
*Tan, Chye
Message 3 of 3 (21 Views)

Re: insufficient memory

03-11-2000 06:02 AM in reply to: *Hashmy, Christel Al
I've experience with other software, that has this insufficient " memory
problems" especially one with rendering abilities.

It seems to me that the computer actually create large file in the temp
directory when you do rendering and some other stuff.

go to your temp directory to check this out, perhaps you might need to erase the
unwanted file.

good luck!

Christel Al Hashmy wrote:

> After working with Quickcad for approx an hour, the screen starts to go
> black and white , followed by "insufficient memory" warning. My version is
> 3.02. I have 64 RAM installed and a large hard disk and never run any other
> program at the same time. Can anybody help?
> Charles Sappa

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community