QuickCAD

Reply
*Cullen, Dave
Message 11 of 17 (23 Views)

Re:

03-22-2000 11:24 AM in reply to: *Cullen, Dave
Ummm...CF whut? The link you gave me is for accessing newsgroups via
AOL. Did I miss something?

drc

Harvey Smith wrote:
>
> Dave,
>
> By all means, place the file in CF. You can pick it up and add it to your
> newsreader from the bottom of the new URL,
> http://www3.autodesk.com/adsk/support/item/0,,180006--151605,00.html. Reference
> the file here and someone will try it.
>
> H
*Cullen, Dave
Message 12 of 17 (23 Views)

Re:

03-22-2000 11:42 AM in reply to: *Cullen, Dave
OK found "customer files" n.g.
File is Frame56 Motor.cad, under QC7 Broke subject.
Lemme know if it works for you.
Thanks much.

drc

Harvey Smith wrote:
>
> Dave,
>
> By all means, place the file in CF. You can pick it up and add it to your
> newsreader from the bottom of the new URL,
> http://www3.autodesk.com/adsk/support/item/0,,180006--151605,00.html. Reference
> the file here and someone will try it.
>
> H
*Smith, Harvey
Message 13 of 17 (23 Views)

Re:

03-22-2000 12:45 PM in reply to: *Cullen, Dave
Hi, Dave.

I don't know if I can be of help here. I can open your file just fine in
AutoSketch R7 and edit it any which way. It seems to be behaving just fine.

Wait for Ric Norris to give it a whirl. He's pro with QC7.

Sorry 'bout that.

H

Dave Cullen wrote:
>
> OK found "customer files" n.g.
> File is Frame56 Motor.cad, under QC7 Broke subject.
> Lemme know if it works for you.
> Thanks much.
>
> drc
>
> Harvey Smith wrote:
> >
> > Dave,
> >
> > By all means, place the file in CF. You can pick it up and add it to your
> > newsreader from the bottom of the new URL,
> > http://www3.autodesk.com/adsk/support/item/0,,180006--151605,00.html. Reference
> > the file here and someone will try it.
> >
> > H
*Cullen, Dave
Message 14 of 17 (23 Views)

Re: QC7 broke

03-24-2000 06:30 AM in reply to: *Cullen, Dave
Couldn't load either of your _mod files into QC. It says the format is
unrecognized. I'm guessing that detaching the files from the news server
had some problem or other (I see a lotta gobble-de-gook text in your
post).

At this point it's simpler to just start over. I WILL get to the bottom
of this. Thanks for the help.

drc

Ric Norris wrote:
>
> Thanks Harvey....you really know how to put pressure on a guy.....!!!!
> You'll get yours in the end....Boomerangs can hurt you know....!!!!
>
> Anyway Dave.....you somehow got a bum file.
>
> When I opened your file in QC....all I had to do was click ONCE....ANYWHERE
> on the page and the program slashed & burnt. The exact same thing when
> opened in AutoSketch.
>
> I then saved your .CAD file as an R14 .DWG file and had no trouble with it
> in LT2000. From LT, I saved it as a .DXF and was able to work with that in
> AS. No good in QC...same problem as before.
>
> While I was in AS, I saved your .CAD drawing as a .SKF file and as a .CAD
> file.
>
> However, the good news is.....BOTH files opened successfully in QC and I was
> able to throw the drawing and bits of the drawing around quite aggressively
> without the program crashing.
>
> I was even able to manipulate the drawing without problems after saving both
> the .SKF & .CAD files as a .CAD file in QC.
>
> I have posted both the files under your original in the CF Newsgroup
> (Frame56 Motor_mod.CAD & Frame56 Motor_mod.SKF).
>
> Let us know how they go.
>
> Cheers,
>
> Ric.
>
> "Harvey Smith" wrote in message
> news:38D930E3.EDF587BC@westnet.com...
> > Hi, Dave.
> >
> > I don't know if I can be of help here. I can open your file just fine in
> > AutoSketch R7 and edit it any which way. It seems to be behaving just
> fine.
> >
> > Wait for Ric Norris to give it a whirl. He's pro with QC7.
> >
> > Sorry 'bout that.
> >
> > H
> >
> > Dave Cullen wrote:
> > >
> > > OK found "customer files" n.g.
> > > File is Frame56 Motor.cad, under QC7 Broke subject.
> > > Lemme know if it works for you.
> > > Thanks much.
> > >
> > > drc
> > >
> > > Harvey Smith wrote:
> > > >
> > > > Dave,
> > > >
> > > > By all means, place the file in CF. You can pick it up and add it to
> your
> > > > newsreader from the bottom of the new URL,
> > > > http://www3.autodesk.com/adsk/support/item/0,,180006--151605,00.html.
> Reference
> > > > the file here and someone will try it.
> > > >
> > > > H
*Smith, Harvey
Message 15 of 17 (23 Views)

Re:

03-24-2000 02:04 PM in reply to: *Cullen, Dave
Dave,

Since I don't seem to be having any problem with your file, is there some file
format you would like me to dl into CF for you? Maybe you and Ric are having the
same kinds of issues. Who knows?

Let me know by direct email if you wish.

H
*Smith, Harvey
Message 16 of 17 (23 Views)

Re: QC7 broke

03-24-2000 03:57 PM in reply to: *Cullen, Dave
OK, Ric.

I put a zip in CF, called "Dave's Frame56Motor." I added a few dimensions, moved
the circle, etc. All seemed fine. See what you can do with it.

H
*Smith, Harvey
Message 17 of 17 (23 Views)

Re: QC7 broke

03-24-2000 08:07 PM in reply to: *Cullen, Dave
So? Did it work?

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community