Quantity Takeoff

New Member
Posts: 1
Registered: ‎07-10-2012
Message 1 of 2 (747 Views)

QTO 2013 - Average Length Calculation

747 Views, 1 Replies
07-16-2012 02:00 PM

I'm trying to get the average length of a wall condition.  The formula would be Length/Count.  For some reason QTO does not calculate and displays only the length of the wall.  Has anyone had any experience with this?

Thanks for any help!

Posts: 359
Registered: ‎08-28-2009
Message 2 of 2 (738 Views)

Re: QTO 2013 - Average Length Calculation

07-18-2012 10:04 AM in reply to: kgiddens112
Hi kgiddens112

I’ve reproduced the issue.  There appears to be an issue with the Count quantity value in formula calculations.  I also found that if you use a numeric value in the place of Length and divide it by Count, the resulting calculation is multiplied rather than divided.

To workaround the issue, please use the actual numeric value of the Count in the formula such as Length/12.

This issue has been logged with our development team.

Best regards,

John Lipp
Support Specialist
Product Support
Autodesk, Inc.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community