Pointing-Devices and Displays

Reply
Active Member
Posts: 10
Registered: ‎07-01-2005
Message 1 of 2 (240 Views)

Graphire 2 tablet behavior with Acad 2012 and Win 7

240 Views, 1 Replies
02-06-2012 08:43 AM

After many years we were finally able to upgrade my system to a Win 7 system (from XP) and Acad 2012 (from 2006).  I have noticed a few quirks in the way my Wacom Graphire 2 tablet interacts with Autocad now.  The main issue is that with a mouse, I can click on a toolbar button that has a submenu (zoom options, for example)j, hold it down for a second, and the submenu appears.  With the pen, I have to hold it down for 3-4 seconds, with that silly Win 7 circle appearing in the interim.  Is there a way to speed this action up?

 

A second issue is that the osnap search distance seems to be much greater that before.  I mean, the distance from the cursor to the suggested osnap point is much greater than before.  Is this an Acad 2012 "feature", and if so, can I reduce that distance?

 

 

*Expert Elite*
pendean
Posts: 20,239
Registered: ‎11-06-2003
Message 2 of 2 (223 Views)

Re: Graphire 2 tablet behavior with Acad 2012 and Win 7

02-09-2012 12:53 PM in reply to: johnsnow

I will leave #1 for someone with your same setup.

 

#2 is the same as 2006, unless #1 is the influence, is the Autosnap Settings in OPTIONS's Drafting Tab, as well as Marker Size and most importantly the settings for APBOX and APERTURE.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community