PLM 360 General Discussion

Reply
Contributor
barattini_ptech
Posts: 14
Registered: ‎11-02-2007
Message 1 of 9 (550 Views)

Vault Sync tool for PLM360

550 Views, 8 Replies
01-14-2013 02:14 AM

Hi all,

I'm searching the Vault synch tool for PLM360. Months ago I downloaded the fist sync tool through the subscription centre, but now I can't find the newest tool release there.

Can you help me?

 

Thanks in advance

Best regards

Fausto

Prisma Tech

Autodesk VAR

 

Product Support
Andrew.Shaw
Posts: 44
Registered: ‎01-09-2012
Message 2 of 9 (542 Views)

Re: Vault Sync tool for PLM360

01-14-2013 04:43 AM in reply to: barattini_ptech

Dear Fausto,

 

The Vault Sync tool was discontinued late last year.

 

You can use Autodesk PLM 360 Connect to transfer data between Vault and PLm 360. Information can be found here.

 

Best regards,



Andrew Shaw
Premium Support Specialist PLM/PDM
Global Services
Autodesk, Inc.

Contributor
barattini_ptech
Posts: 14
Registered: ‎11-02-2007
Message 3 of 9 (539 Views)

Re: Vault Sync tool for PLM360

01-14-2013 04:50 AM in reply to: barattini_ptech

Thank you Andrew.

I searched through the link you provided me and I found a lot of useful information but I couldn't find a link in order to download the sync tool. Could you tell me where can I find it?

 

Thanks

Ciao

Fausto

Product Support
Andrew.Shaw
Posts: 44
Registered: ‎01-09-2012
Message 4 of 9 (536 Views)

Re: Vault Sync tool for PLM360

01-14-2013 05:12 AM in reply to: barattini_ptech

Hello Fausto,

 

Autodesk PLM 360 Connect isn't a free tool to be downloaded. It's a complete middleware solution. You can use it for Vault but also for other sources and/or targets such as ERP and CRM applications.

 

I suggest you contact your account manager to enquire on how you can purchase this tool.

 

Best regards,



Andrew Shaw
Premium Support Specialist PLM/PDM
Global Services
Autodesk, Inc.

*Expert Elite*
scottmoyse
Posts: 1,605
Registered: ‎06-10-2009
Message 5 of 9 (518 Views)

Re: Vault Sync tool for PLM360

01-14-2013 01:20 PM in reply to: barattini_ptech

Hey Fausto,

 

I'd be interested in hearing what you think about the pricing once you find out

 

Cheers

 

Scott

Cheers
Scott Moyse

Please use Mark Solutions!.Accept as Solution &Give Kudos!Kudos to further enhance the value of these forums. Cheers!


   

Mentor
dkeeley
Posts: 214
Registered: ‎10-04-2012
Message 6 of 9 (515 Views)

Re: Vault Sync tool for PLM360

01-14-2013 01:42 PM in reply to: scottmoyse

Hi All,

 

I had a chat with my rep at Autodesk after reading this post. We costed our PLM/PDM implementation based on the Vault integration being free (as it was before). I'll be expecting the new integration to be free also - otherwise I'm going to have a problem with my board!

 

Also I have to say that Autodesk's communication of this could have been a little better. Otherwise I'm pretty happy with the level of service.

 

David.

*Expert Elite*
scottmoyse
Posts: 1,605
Registered: ‎06-10-2009
Message 7 of 9 (509 Views)

Re: Vault Sync tool for PLM360

01-14-2013 01:50 PM in reply to: dkeeley

dkeeley wrote:

 

I'll be expecting the new integration to be free also - otherwise I'm going to have a problem with my board!

 


If you have it already, I believe it will continue to 'work' albeit any bugs won't be fixed and it will be unsupported. 

 

However, usign the REST API you can write your own integration without having to use PLM 360 Connect/Jitterbit... Potentially that could be far more cost effective in the long run for small to medium businesses. 

Cheers
Scott Moyse

Please use Mark Solutions!.Accept as Solution &Give Kudos!Kudos to further enhance the value of these forums. Cheers!


   

Contributor
barattini_ptech
Posts: 14
Registered: ‎11-02-2007
Message 8 of 9 (481 Views)

Re: Vault Sync tool for PLM360

01-17-2013 02:38 AM in reply to: barattini_ptech

Hello Scott, I think that this change can be difficult to explain to Autodesk Vault customers as they would expect to connect with PLM360 without having to purchase a synch tool. In addition to this, if I understood well the PLM360 connect price (12.000 $), I think that it will be seen as to exprensive in order to transfer item, boms and dwf. Maybe it has been a mistake to release a first free Vault synch tool release (it was available for customers with Vault maintenance), because at that time the message spread was that the synch tool was free, and now it isn't.

 

Cheers

Fausto 

Contributor
ricardot
Posts: 14
Registered: ‎01-10-2007
Message 9 of 9 (202 Views)

Re: Vault Sync tool for PLM360

01-09-2014 10:58 AM in reply to: barattini_ptech

 

You might want to take a look at our CAD-ERP data integration system:

http://www.elmosolutions.com/cad_erp_integration/agni_link.html

 

The latest addition to our line of connectors is Autodesk Vault, which will support all flavors: Basic, Workgroup and Professional.

 

Hope this helps,

 

Ricardo Talbot

Elmo Solutions

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Ask the Community