.NET

## .NET

New Member
Posts: 2
Registered: ‎06-12-2013
Message 1 of 4 (404 Views)

# Prompt user to pick point on circle with given radius

404 Views, 3 Replies
07-25-2013 02:04 AM

Hi!

I'm searching for a solution to achieve the following:

I need my users to pick a point p, enter a distance r and a direction v. A new point should be created r units away in vectorial direction. Therefore, the new point is located on an imaginary circle with radius r and center p.

Currently, the user picks the first point and enters a distance. Then, he has to pick another point (Editor.GetPoint with UseBasePoint = true), I calculate the vector between both points, create a new point (with location = BasePoint.location) and translate it d units in vectorial direction. This works of course, but the problem is, that the user doesn't see directly, where his new point is located, since he may pick a point closer to or farther away then r units.

Naively spoken, I want to restrict the line between BasePoint and new point while prompting the user to a fixed length. Is there any way to achieve this? Native calls to ObjectARX-methods would be also okay.

Thank you!

Posts: 352
Registered: ‎07-24-2007
Message 2 of 4 (371 Views)

# Re: Prompt user to pick point on circle with given radius

07-25-2013 03:05 PM in reply to: m.schilder

Fenton Webb

Developer Technical Services

Autodesk Developer Network

*Expert Elite*
Posts: 2,077
Registered: ‎04-29-2006
Message 3 of 4 (359 Views)

# Re : Prompt user to pick point on circle with given radius

07-26-2013 03:59 AM in reply to: m.schilder

Hi,

Maybe you can use a Jig to show the point durring the prompt for angle.

```using System;

[assembly: CommandClass(typeof(JigPointOnCircleSample.CommandMethods))]

namespace JigPointOnCircleSample
{
public class CommandMethods
{
[CommandMethod("Test", CommandFlags.Modal)]
public void Test()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;

int pdmode = db.Pdmode;
double pdsize = db.Pdsize;

try
{
db.Pdmode = 3;
db.Pdsize = -3.0;

PromptPointResult ppr = ed.GetPoint("\nCenter: ");
if (ppr.Status != PromptStatus.OK) return;

PromptDistanceOptions pdo = new PromptDistanceOptions("\nRadius: ");
pdo.BasePoint = ppr.Value;
pdo.UseBasePoint = true;
PromptDoubleResult pdr = ed.GetDistance(pdo);
if (pdr.Status != PromptStatus.OK) return;

Point3d center = ppr.Value.TransformBy(ed.CurrentUserCoordinateSystem);

using (Transaction tr = db.TransactionManager.StartTransaction())
{
BlockTableRecord btr =
(BlockTableRecord)tr.GetObject(db.CurrentSpaceId, OpenMode.ForWrite);
while (true)
{
using (DBPoint point = new DBPoint())
{
DBPointJig jig = new DBPointJig(point, center, radius);
PromptResult pr = ed.Drag(jig);
if (pr.Status != PromptStatus.OK) break;

btr.AppendEntity(point);
db.TransactionManager.QueueForGraphicsFlush();
}
}
tr.Commit();
}
}
catch (System.Exception ex)
{
ed.WriteMessage("\nError: " + ex.Message + ex.StackTrace);
}
finally
{
db.Pdmode = pdmode;
db.Pdsize = pdsize;
ed.Regen();
}
}
}

class DBPointJig : EntityJig
{
private Point3d center;
private DBPoint point;

public DBPointJig(DBPoint point, Point3d center, double radius)
: base(point)
{
this.point = point;
this.center = center;
}

protected override bool Update()
{
return true;
}

protected override SamplerStatus Sampler(JigPrompts prompts)
{
JigPromptAngleOptions opt = new JigPromptAngleOptions("\nAngle: ");
opt.BasePoint = center;
opt.UseBasePoint = true;
opt.Cursor = CursorType.RubberBand;
opt.UserInputControls =
UserInputControls.UseBasePointElevation | UserInputControls.NullResponseAccepted;
PromptDoubleResult pdr = prompts.AcquireAngle(opt);
if (pdr.Status == PromptStatus.Cancel || pdr.Status == PromptStatus.Error)
return SamplerStatus.Cancel;
else if (pdr.Value == angle)
return SamplerStatus.NoChange;
else
{
angle = pdr.Value;
return SamplerStatus.OK;
}
}

private Point3d Polar(Point3d center, double angle, double distance)
{
return new Point3d(
center.X + distance * Math.Cos(this.angle),
center.Y + distance * Math.Sin(this.angle),
center.Z);
}
}
}```

Gilles Chanteau
New Member
Posts: 2
Registered: ‎06-12-2013
Message 4 of 4 (336 Views)

# Re: Prompt user to pick point on circle with given radius

07-29-2013 12:25 AM in reply to: m.schilder

Hi _gine,

seems to be the solution, for the moment. Thank you.

If anyone is curious how _gine's solution looks like: see the attached screenshot. The 'x' marks a point on an (imaginary) circle with pre-entered center and radius.

I have an old C++-code snippet, which (I guess) allows picking a point at specified distance with a fixed-length rubberband. Unfortunately, I'm not able to validate my assumptions, since it's an old, abandoned project which I'm not able to compile. Furthermore, I wasn't able to find any documentation on the used ads_*-functions. Maybe someone is interesed in this.

```int GetPointAtDistance(ads_point base, double dDistance, ads_point retPoint, int *piKeyCode)
{
int ret = 0;
int result;
struct resbuf ergebnis;
double angle_old, angle;
angle_old = 0;
World2Ucs(base);
do
{
result = 0;
if (ret != RTNORM)
{
return ret;
}
switch(result)
{
case 2:
if(piKeyCode)
{
*piKeyCode = ergebnis.resval.rint;
ret = RTKWORD;
}
break;
case 5:
if (angle != angle_old)
{
}
angle_old = angle;
break;
case 3:
break;
case 12:
ret = RTCAN;
break;
}
} while(result != 3 && ret == RTNORM);
return ret;
}```

### You are not logged in.

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.