.NET

Reply
Valued Contributor
Ertqwa
Posts: 91
Registered: ‎10-03-2011
Message 1 of 5 (252 Views)

MLeader - landing - dogleg

252 Views, 4 Replies
06-23-2013 01:26 AM

Hello,

 

Can anyone tell me what the difference is between the landing and a dogleg of a mleader? What is the difference between the properties:

EnableDogleg

DoglegLength

EnableLanding

LandingGap

 

Thank you.

ADN Support Specialist
fenton.webb
Posts: 352
Registered: ‎07-24-2007
Message 2 of 5 (225 Views)

Re: MLeader - landing - dogleg

06-24-2013 10:07 AM in reply to: Ertqwa

If you draw an MLeader inside of AutoCAD, then enable the Properties window and select the MLeader you will easily see what all of these options do





Fenton Webb

Developer Technical Services

Autodesk Developer Network


Valued Contributor
Ertqwa
Posts: 91
Registered: ‎10-03-2011
Message 3 of 5 (215 Views)

Re: MLeader - landing - dogleg

06-24-2013 01:19 PM in reply to: fenton.webb

Hello,

 

No it doesn't. The multileader does not have a property dogleg or dogleg length (in AutoCAD 2012).

But it turns out that the property 'Landing distance' (in AutoCAD) is the 'DogLegLength' (in .NET API), and 'EnableDogLeg' is the 'Horizontal Landing'. 'Landing gap' is for mleaders with text only. Which leaves 'EnableLanding'. What does this do? If I set it to FALSE (in .NET API), it still shows the landing gap for a mleader with text.

 

Documentation says "Boolean to enable/disable landing of leader line." But it doesn't affect horizontal landing or landing gap.


Ty for the reply.

Valued Mentor
jeff
Posts: 325
Registered: ‎05-12-2009
Message 4 of 5 (207 Views)

Re: MLeader - landing - dogleg

06-24-2013 04:51 PM in reply to: Ertqwa

If I remember correctly and would have to dig it up, but certain properties had to be set in a certain order and/or would only work after the Mleader was added to the database.

You can also find your answers @ TheSwamp
Valued Contributor
Ertqwa
Posts: 91
Registered: ‎10-03-2011
Message 5 of 5 (196 Views)

Re: MLeader - landing - dogleg

06-26-2013 09:51 PM in reply to: jeff

Ok, I'll keep that in mind. No luck so far.

 

Ty for the reply.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community