Mechanical Desktop

Reply
*Brainard, Michael
Message 11 of 18 (44 Views)

Re:

10-16-2002 01:36 AM in reply to: *Brainard, Michael
The problem occurs when I apply the ambend to the part....
*Howard, Jeff
Message 12 of 18 (44 Views)

Re:

10-16-2002 01:36 AM in reply to: *Brainard, Michael
Patient: "Doc, it hurts when I do this."
Doctor: "Well, don't do that!"
------------------------------

Sorry, can't offer much advice. If you can post the part to CF someone may be
able to offer suggestions.

Jeff
==========================

"Michael Brainard" wrote in message
news:f118cab.9@WebX.maYIadrTaRb...
The problem occurs when I apply the ambend to the part....
*Brainard, Michael
Message 13 of 18 (44 Views)

Re:

10-16-2002 01:40 AM in reply to: *Brainard, Michael
Creating the .stp file and importing it back in did not good either. Part
looks fine in model space....paper space it still won't show certain
entities, even as a base solid!


"Michael Brainard" wrote in message
news:f118cab.9@WebX.maYIadrTaRb...
> The problem occurs when I apply the ambend to the part....
>
>
*darvinv
Message 14 of 18 (44 Views)

Re:

10-16-2002 02:42 AM in reply to: *Brainard, Michael
    Got to be an mdt PS problem.
Acis out file displays fine in spacial's acis viewer and pastes in and displays
fine in word. Just can't get hidden line view to display properly in mdt
PS.

    I'm baffled, just took a look in
a newer version of the hoops viewer and there are definitely some unexpected
lines and triangles. it might be the cuts in the edges? They don't seem to
take a curve. I'll try some experiments later, when i've got a little more
time.

darvin
*Abel, Greg
Message 15 of 18 (44 Views)

Re: Curved edges of object not showing up in drawing in paperspace

10-21-2002 12:36 AM in reply to: *Brainard, Michael
Michael,
Edit the view that is questionable in Paper Space and get rid of the
check mark in the "Remove Coincidant Edges" this should solve your
problem.
Greg
*Brainard, Michael
Message 16 of 18 (44 Views)

Re:

10-21-2002 12:54 AM in reply to: *Brainard, Michael
Greg,

Sorry, no dice...

To get this to work, I had to eliminate the ambend from the combined
part....go back the the flat part and apply the ambend there. Eliminate the
amcombine and the part looks fine.....


Mike


"Greg Abel" wrote in message
news:3db41e09.4873788@DISCUSSION.AUTODESK.COM...
> Michael,
> Edit the view that is questionable in Paper Space and get rid of the
> check mark in the "Remove Coincidant Edges" this should solve your
> problem.
> Greg
*Abel, Greg
Message 17 of 18 (44 Views)

Re: Curved edges of object not showing up in drawing in paperspace

10-21-2002 01:11 AM in reply to: *Brainard, Michael
Michael,
Opps, that just pacifies the problem , does not fix it...if you turn
on hidden lines and remove the check mark from "remove coincident
edges" if show up fine, however, when you suppress the bend feature,
everything shows up and works just fine too as you said. Weird, not
sure what is going on?
Greg
*Brainard, Michael
Message 18 of 18 (44 Views)

Re:

10-21-2002 01:50 AM in reply to: *Brainard, Michael
The. lines that should be shown on the am_vis layer are dumped into the
am_hid layer. So, just for fun I tried to modify the edge properties of a
screwed up view....I turned ON the hidden lines.....selected one of the
hidden lines that should be visible....changed it from the am_hid layer to
the am_vis layer......should show up then, right? WRONG.....still isn't
visible......


"Greg Abel" wrote in message
news:3db425d5.6869748@DISCUSSION.AUTODESK.COM...
> Michael,
> Opps, that just pacifies the problem , does not fix it...if you turn
> on hidden lines and remove the check mark from "remove coincident
> edges" if show up fine, however, when you suppress the bend feature,
> everything shows up and works just fine too as you said. Weird, not
> sure what is going on?
> Greg

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community