I want Frame Generator to be able to work with curved frame objects correctly
Can you explain in detail what happens incorrectly?
I want to be able to Trim, Extend, Lengthen, Shorten, Miter, and Notch any frame member regardless if it is curved or straight. I should be able to use either definition when selecting the start/end or other condition that the frames need to use.
The other thing that's annoying with Frame Generator is that any curved elements you create, the curved part is separate from the straight part. If I want a piece that's 60 inches long with a bend at the end that's got a 6" radius, it'll give me a 54" straight part and a part that's a 90 degree bend with R6, rather than a single piece of bent steel.
You must be a registered user to add a comment here. If you've already registered, please log in. If you haven't registered yet, please register and log in.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Upgrading to a 2015 product? Make sure to check these out 1st!
Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.