Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

time stamp MIA

5 REPLIES 5
Reply
Message 1 of 6
PENengr
843 Views, 5 Replies

time stamp MIA

How do you get a simple time stamp on a .idw?? 

 

I've  have a time stamp field but it won't show up.  I've been in the template to edit; iprops, field edit; border edit........  No luck. 

 

Any thoughts?

5 REPLIES 5
Message 2 of 6
Curtis_Waguespack
in reply to: PENengr

Hi PENengr,

 

Here is one solution from the guys at the BeingInventive blog:

http://beinginventive.typepad.com/being-inventive/2011/07/plot-date-stamp-in-title-block.html

 

It might be helpful to attach an example file for others to look at as well.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

 

 

Message 3 of 6
PENengr
in reply to: Curtis_Waguespack

Curtis, this is great! however--- I made this rule in our .idw template but when other draftsman printed it didn't carry over.  Am I missing a setting or something?

Message 4 of 6
Curtis_Waguespack
in reply to: PENengr

Hi PENengr,

 

It's difficult to tell without seeing the rule and/or a sample file.

Can you attach an example file for others to look at ?

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

Message 5 of 6
PENengr
in reply to: Curtis_Waguespack

Yes.... attached.  I'm reading your blog http://inventortrenches.blogspot.com/2011/02/ilogic-code-for-parts-lists-title.html

and trying to make my ilogic rule an external rule????  .......Greg

Message 6 of 6
Curtis_Waguespack
in reply to: PENengr

Hi PENengr,

 

Nice job on the title block.

It looks like your custom iProp in your border got lost. I won't venture much of a guess as to why, other than to say that if you're anything like me you got pulled away in the middle of this and forgot to save or something along those lines.

 

Autodesk Inventor Time Date Plot Stamp.png

 

Also, I couldn't tell for sure if you were asking about how to create an external ilogic rule (as opposed to an embedded rule), but if so here goes: Just set the External Rules tab active on the iLogic Browser and then right-click on the top level node and select Create New External Rule

 

Autodesk Inventor iLogic How to Create an External Rule.png

 

 

you can change the external rule search paths as shown here:

http://inventortrenches.blogspot.com/2011/03/change-path-for-dlls-and-net-assemblies.html

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report