Inventor General

Reply
Contributor
Posts: 11
Registered: ‎11-23-2012
Message 1 of 3 (138 Views)

showing section view in base viw

138 Views, 2 Replies
12-13-2012 02:14 AM

Dear sir,

 

plz suggest me the procedure how to show section view in base view with out projection the component.

 

regards

RS MODI

Valued Contributor
Posts: 93
Registered: ‎06-09-2008
Message 2 of 3 (126 Views)

Re: showing section view in base viw

12-13-2012 04:05 AM in reply to: admin

Select the view on your drawing, and click "Create Sketch" from the "Place Views" tab.  (Make sure your view is selected before you create the sketch, so the sketch will be contained within the view).

Now draw a rectangle around the outisde of the whole part.  Anything within the closed area will be sectioned.

Click "Finish Sketch."

Click "Break Out" on the "Place Views" tab, and select your view.

For the depth, I'd probably select "From Point, 0.000," and pick a point on the outer edge of one of the cylindrical features, since that point will be located at the right depth for the section to go to the exact center of the part.

-Using Autodesk Inventor Professional 2012
Product Support
Posts: 204
Registered: ‎10-14-2007
Message 3 of 3 (89 Views)

Re: showing section view in base viw

12-17-2012 12:00 AM in reply to: nannerdw

There is another process to get what you want.

1, create base view, and move it out of the drawing area

2, create section view from base view

 

Then only the section view is in the drawing area and printable.

 



Yong Jing
Product Support Specialist
Frontline Technical Support, CSS. GCSO

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube