Inventor General

Reply
Valued Contributor
Mike686
Posts: 93
Registered: ‎03-28-2011
Message 1 of 4 (309 Views)

show appearances in part list

309 Views, 3 Replies
01-18-2013 01:17 PM

Hi, i'm trying to show the appearance of the part in a part list next to the column material

and i can't find how to do it

can someone help me?

Product Design Suite 2013
*Expert Elite*
Cadmanto
Posts: 3,066
Registered: ‎12-07-2011
Message 2 of 4 (272 Views)

Re: show appearances in part list

01-21-2013 05:04 AM in reply to: Mike686

See if this link helps you.

http://forums.autodesk.com/t5/Autodesk-Inventor/Export-BOM-parts-list-with-thumbnail-image/td-p/2662...

Best Regards,
Scott McFadden
Inventor Professional 2014
(Colossians 3:23-25)

Product Support
Posts: 67
Registered: ‎01-08-2013
Message 3 of 4 (267 Views)

Re : show appearances in part list

01-21-2013 05:19 AM in reply to: Mike686

Hi,

 

Here is a possible solution using an “illogic” rule you could use in a BOM of an idw file to show the "value" of the "appearance" of the model.

 

But several things need to be done to make this work:

 

Step 1:

Add the following iLogic rule on every existing parts file (or directly into the template if necessary). 

It will create a custom property called "Appearance" and will copy the value of the "Appearance" of the ipt file.

Trigger the rule "Before Save Document". This is important to make sure that the color in the custom property stays up-to-date every time the part gets saved:

 

customPropertySet = ThisDoc.Document.PropertySets.Item("Inventor User Defined Properties")

Try

     prop = customPropertySet.Item("Appearance")

Catch

     customPropertySet.Add("", "Appearance")

End Try

iProperties.Value("Custom", "Appearance") =  iProperties.PartColor

 

Step 2:

Go in the assembly (iam) and edit BOM>Add iProperties column> create a new column >write Appearance>ok

To verify Edit “BOM” and verify the column “Appearance” is visible > Save the template.

 

Step3 :

Start a new drawing. Go to the “Document Settings”  > “Drawing tab” > "Additional Custom Model iProperty source" to select the ipt file prepared in Step 1 > “Copy Model iProperties Settings” to select the “Appearance”.

Place a view of the Assembly prepared in step 2 and insert a BOM

Edit BOM  > Column Chooser > New Properties > select “Appearance” > ok

 

=> A new column should be visible with the Appearance value of the different components..

 

Remark: You could have also the possibility to include all these manipulations directly in your templates.

 

I hope this will help you.

 

Please, mark any response clicking on "Accept as Solution" button if it answers your question 

 

 



Nicolas Bourquin
Valued Contributor
Mike686
Posts: 93
Registered: ‎03-28-2011
Message 4 of 4 (207 Views)

Re : show appearances in part list

01-22-2013 11:10 AM in reply to: Nicolas.Bourquin

thanks nicolas

i will try your method

and i will give you news if this works for me

Product Design Suite 2013

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube