Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Quinn did some pop rivets that are at Charles site...www.cbliss.com I
think they are only flared though. I imagine it wouldn't take much to copy
them and make them non flared?
--
Kent Keller
Member of the Autodesk Discussion Forum Moderator Program
http://www.MyMcad.com/KWiK/Mcad.htm
> "hotsam" wrote in message
> news:f133ebc.-1@WebX.maYIadrTaRb...
> > can someone put up a rivet ipart for both assemled and flared
> > thx
> >
> >
>
>
One thing that was not really mentioned was that those rivets are
designed in such a way to add a specific material thickness (within a
grip range) to the table as required.
Perhaps I should do up a small doc to be included with the zip that is
hosted on Charles' site detailing the simple steps to modify the table
to add the "custom" sizes.
If hotsam is indeed asking about the "hammer" rivets, I really do wonder
HOW he intends to document them in 2 states within the assembly. (I am
assuming that "assembled" and "flared" are 2 distinct states)
QBZ
"Kent Keller" wrote in message
news:98E0BA25735541E2D2B1012026F40510@in.WebX.maYIadrTaRb...
> Quinn did some pop rivets that are at Charles site...www.cbliss.com
I
> think they are only flared though. I imagine it wouldn't take much
to copy
> them and make them non flared?
>
> --
> Kent Keller
> Member of the Autodesk Discussion Forum Moderator Program
>
> http://www.MyMcad.com/KWiK/Mcad.htm
>
> > "hotsam" wrote in message
> > news:f133ebc.-1@WebX.maYIadrTaRb...
> > > can someone put up a rivet ipart for both assemled and flared
> > > thx
> > >
> > >
> >
> >
>
>
Here's a pile of upset aluminum aircraft rivets. Dome and 100° flat heads -
flat, driven, pan, and domed bases. Dash 3 through 8 and universal grip
lengths. It's a silly custom iPart so it doesn't supply filenames. -Bill
