Inventor General

Reply
Active Member
Posts: 10
Registered: ‎10-04-2012
Message 1 of 12 (537 Views)
Accepted Solution

retrieve a bend from sweep ?

537 Views, 11 Replies
10-04-2012 03:48 AM

hello.

 

I have created a pipe using sweep through 2 planes and 3d sketch. I want a specific bend on that pipe to be extracted for drawing purpose. How do I do that ?

 

thanks in advance :smileyhappy:

*Expert Elite*
Posts: 25,359
Registered: ‎04-20-2006
Message 2 of 12 (523 Views)

Re: retrieve a bend from sweep ?

10-04-2012 04:36 AM in reply to: mikkele86

Can you Retrieve the 2D generating sketches in the drawing?

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
Posts: 10
Registered: ‎10-04-2012
Message 3 of 12 (519 Views)

Re: retrieve a bend from sweep ?

10-04-2012 04:43 AM in reply to: JDMather

dont think so. cant see eny 2d sketch, only 3d.

 

picture is attached

Valued Mentor
japike
Posts: 322
Registered: ‎02-06-2004
Message 4 of 12 (508 Views)

Re: retrieve a bend from sweep ?

10-04-2012 05:00 AM in reply to: mikkele86

Can you post the part?

Peace,
Jeff
Inventor 2013
Active Member
Posts: 10
Registered: ‎10-04-2012
Message 5 of 12 (505 Views)

Re: retrieve a bend from sweep ?

10-04-2012 05:03 AM in reply to: japike

yes, here you go :smileyhappy:

*Expert Elite*
Posts: 25,359
Registered: ‎04-20-2006
Message 6 of 12 (496 Views)

Re: retrieve a bend from sweep ?

10-04-2012 05:28 AM in reply to: mikkele86

You might have to make them visible in ipt first, I don't recall for sure.

 

Model Sketches.png

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
Posts: 25,359
Registered: ‎04-20-2006
Message 7 of 12 (492 Views)

Re: retrieve a bend from sweep ?

10-04-2012 05:34 AM in reply to: JDMather

If they are not visible in ipt, after retrieving them right click and Include.

 

Include.png

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
Posts: 10
Registered: ‎10-04-2012
Message 8 of 12 (484 Views)

Re: retrieve a bend from sweep ?

10-04-2012 05:48 AM in reply to: JDMather

ok. I can retrieve the 2D sketch's but how will that help me, retrieve the bend to a standalone part and putting angle dimensions on a bend part ? if you noticed the bend is bended through 2 axis.

 

I can be more specific, I must find the rotation degrees of that bend and put them on a drawing. :smileyhappy:

Active Member
Posts: 10
Registered: ‎10-04-2012
Message 9 of 12 (480 Views)

Re: retrieve a bend from sweep ?

10-04-2012 06:01 AM in reply to: mikkele86

here an example of what im looking for, but the method is really dirty.

 

also note the picture, thats the angle im looking for.

Valued Mentor
japike
Posts: 322
Registered: ‎02-06-2004
Message 10 of 12 (450 Views)

Re: retrieve a bend from sweep ?

10-04-2012 06:50 AM in reply to: mikkele86

Could you add workplanes to your part? Then use the workplanes and the Change View Orientation tool to get the drawing view into the correct orientation.

Peace,
Jeff
Inventor 2013

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube