Inventor General

Reply
Contributor
ericjed13
Posts: 20
Registered: ‎10-09-2012
Message 1 of 3 (269 Views)
Accepted Solution

"Failed to create a new study file" in 2012

269 Views, 2 Replies
10-29-2012 07:32 PM

I would like to report on a latest problem i encountered.

 

I dunno why, but when it started to run a part fill analysis, Inventor prompted me that it ""Failed to create a new study file".

 

I tried restarting inventor and still, nothing happened. Moreover, i tried another file and it worked. How come for this part it didnt? 

 

Please see attached.

 

Thank you.

Employee
MingweiGao
Posts: 150
Registered: ‎08-04-2011
Message 2 of 3 (249 Views)

Re: "Failed to create a new study file" in 2012

10-30-2012 01:56 AM in reply to: ericjed13

I didn't see this error in the last several years. But as your said, it is only for this part. Can you share the dataset to me to give some investigation? My e-mail address is mingwei.gao@autodesk.com

 

Thanks,


Mingwei Gao
Software QA Engineer
Inventor Quality Assurance Team

Employee
MingweiGao
Posts: 150
Registered: ‎08-04-2011
Message 3 of 3 (213 Views)

Re: "Failed to create a new study file" in 2012

10-31-2012 06:51 PM in reply to: ericjed13

I had a look at your dataset and I also repied your mail. But it seems the message hasn't been delivered. I don't know the reason. Anyway, I also want to share my message in here for other guys:

 

Yes, this issue is related with the long file name. Because of Mold app will use the default design file name to name the all simulation results files, such as below picture.

 Moldflow analysis file name.png

But I want to say that you also can use “Corner Joint Final Re-Design with Extrusion” as your design assembly name and do the part analyses. There is a solution to do it. Please refer to the below steps:

  1. After you entered into Mold environment(before place the plastic part), you need to right-click on the Mold Design browser and check Prompt for File Names option.

Prompt for File Names option.png

2. Select your plastic part and place it into mold design.

3. After you placed the part, there is a File Naming dialog pop up:

Rename model browser display names option.png

-You need to check Rename Model Browser Display Names option and then double click on the File Name column to remove some redundant words from them, such as delete “Corner Joint Final Re-Design with Extrusion” from all components. Click OK to apply it.

4. After the above steps, you can assign material and do part analyses.

In this way, you can reduce the length of simulation results file name and  continue to do part analyses.


Mingwei Gao
Software QA Engineer
Inventor Quality Assurance Team

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube