Inventor General

Reply
*Laimer, Leo
Message 1 of 4 (20 Views)

problem with dim

20 Views, 3 Replies
11-26-2002 10:01 PM
Group,
I've seen this in 5.3 before, and stumbled over it again:
When an assy is slightly disaligned in space, and you create views of it
with standard orientation, it's impossible to put dims on some views. Very
annoying.

Regards,
--
Leo Laimer
Maschinen- und Fertigungstechnik
A-4820 Bad Ischl - Austria
*J, Dave
Message 2 of 4 (20 Views)

Re: problem with dim

11-26-2002 10:22 PM in reply to: *Laimer, Leo
The answer depends on what you want to do. First, if you want the assembly
alligned in space, you have to constrain something to the origin planes. If, for
some reason you want to dim. it out of whack, you have to make a sketch in the
IDW view, project the geometry you want to dim, and dimension that. You can set
this to project automaticly in Application Options.

--
Dave Jacquemotte
davej@autoconcorp.com


"Leo Laimer" wrote in message
news:6A44F8C56A87899961D069BA125A6525@in.WebX.maYIadrTaRb...
> Group,
> I've seen this in 5.3 before, and stumbled over it again:
> When an assy is slightly disaligned in space, and you create views of it
> with standard orientation, it's impossible to put dims on some views. Very
> annoying.
>
> Regards,
> --
> Leo Laimer
> Maschinen- und Fertigungstechnik
> A-4820 Bad Ischl - Austria
>
>
*J, Dave
Message 3 of 4 (20 Views)

Re:

11-26-2002 10:28 PM in reply to: *Laimer, Leo
Nevermind that answer...it's Monday somewhere, isn't it?

--
Dave Jacquemotte
davej@autoconcorp.com


"Dave J" wrote in message
news:92A616BD3A7B12457EDA23BD5EDE5B63@in.WebX.maYIadrTaRb...
> The answer depends on what you want to do. First, if you want the assembly
> alligned in space, you have to constrain something to the origin planes. If,
for
> some reason you want to dim. it out of whack, you have to make a sketch in the
> IDW view, project the geometry you want to dim, and dimension that. You can
set
> this to project automaticly in Application Options.
>
> --
> Dave Jacquemotte
> davej@autoconcorp.com
>
>
> "Leo Laimer" wrote in message
> news:6A44F8C56A87899961D069BA125A6525@in.WebX.maYIadrTaRb...
> > Group,
> > I've seen this in 5.3 before, and stumbled over it again:
> > When an assy is slightly disaligned in space, and you create views of it
> > with standard orientation, it's impossible to put dims on some views. Very
> > annoying.
> >
> > Regards,
> > --
> > Leo Laimer
> > Maschinen- und Fertigungstechnik
> > A-4820 Bad Ischl - Austria
> >
> >
>
>
*Laimer, Leo
Message 4 of 4 (20 Views)

Re:

11-27-2002 01:12 AM in reply to: *Laimer, Leo
Thanks, Dave.
I know about the "realign in space" thing.
It's just difficult to align this object, it's an artist's work and has
almost no faces to be aligned to origin.
What I was doing was bring in one view off a design view, and make several
projected view off this. I could dim the first view, but none of the
subsequent ones.
This really looks like a bug to me.

Regards,
--
Leo Laimer
Maschinen- und Fertigungstechnik
A-4820 Bad Ischl - Austria


"Dave J" schrieb im Newsbeitrag
news:A34AA1D4170E58586B83AE3FDAC93C50@in.WebX.maYIadrTaRb...
> Nevermind that answer...it's Monday somewhere, isn't it?
>
> --
> Dave Jacquemotte
> davej@autoconcorp.com
>
>
> "Dave J" wrote in message
> news:92A616BD3A7B12457EDA23BD5EDE5B63@in.WebX.maYIadrTaRb...
> > The answer depends on what you want to do. First, if you want the
assembly
> > alligned in space, you have to constrain something to the origin planes.
If,
> for
> > some reason you want to dim. it out of whack, you have to make a sketch
in the
> > IDW view, project the geometry you want to dim, and dimension that. You
can
> set
> > this to project automaticly in Application Options.
> >
> > --
> > Dave Jacquemotte
> > davej@autoconcorp.com
> >
> >
> > "Leo Laimer" wrote in message
> > news:6A44F8C56A87899961D069BA125A6525@in.WebX.maYIadrTaRb...
> > > Group,
> > > I've seen this in 5.3 before, and stumbled over it again:
> > > When an assy is slightly disaligned in space, and you create views of
it
> > > with standard orientation, it's impossible to put dims on some views.
Very
> > > annoying.
> > >
> > > Regards,
> > > --
> > > Leo Laimer
> > > Maschinen- und Fertigungstechnik
> > > A-4820 Bad Ischl - Austria
> > >
> > >
> >
> >
>
>

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube