Is it in ilogic possible to check which pos rep that is active using a rule? Is it possible to activate a view rep using a rule?
I'd like to do something like:
If this "pos rep name" is active, then activate this "view rep name"
Solved! Go to Solution.
I did not get the existing function in iLogic, but this can be accomplished via Inventor API -
Dim oDoc As AssemblyDocument
Set oDoc = ThisApplication.ActiveDocument
Dim oCompDef As AssemblyComponentDefinition
Set oCompDef = oDoc.ComponentDefinition
Dim sActivePR As String
sActivePV = oCompDef.RepresentationsManager.ActivePositionalRe
Dim sActiveDV As String
sActiveDV = oCompDef.RepresentationsManager.ActiveDesignViewRe
Dim sActiveLOD As String
sActiveLOD = oCompDef.RepresentationsManager.ActiveLevelOfDetai
And you could also use this code sample in iLogic, and maybe the error shows up, and you could remove the "Set" in code line to fix it.
Here is an example that might help, along with some sample files.
I hope this helps.
Best of luck to you in all of your Inventor pursuits,
' set a reference to the assembly component definintion. ' This assumes an assembly document is open. Dim oAsmCompDef As AssemblyComponentDefinition oAsmCompDef = ThisApplication.ActiveDocument.ComponentDefinition 'toggle Between Positional Representations If oAsmCompDef.RepresentationsManager.ActivePositiona
lRepresentation.Name = "Master" Then oAsmCompDef.RepresentationsManager.PositionalRepre sentations.Item("Stacked").activate ElseIf oAsmCompDef.RepresentationsManager.ActivePositiona lRepresentation.Name = "Stacked" Then oAsmCompDef.RepresentationsManager.PositionalRepre sentations.Item("Master").activate End if 'set View Representation based on of the active Positional Representation If oAsmCompDef.RepresentationsManager.ActivePositiona lRepresentation.Name = "Master" Then oAsmCompDef.RepresentationsManager.DesignViewRepre sentations.Item("Blue").activate ElseIf oAsmCompDef.RepresentationsManager.ActivePositiona lRepresentation.Name = "Stacked" Then oAsmCompDef.RepresentationsManager.DesignViewRepre sentations.Item("Red").activate End if
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.
Thank you very much Curtis
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.