Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I want to insert a autocad dwg into a sketch. The wizard starts and when I
get to the constrain endpoints I get a error "An unsupported operation was
attempted" Am I missing something here?
It should work. Check over the AutoCAD drawing and make sure things are as clean as
possible. If you can't get it zip it up and post it to customer files and someone will
see if they can get it to work.
--
Kent
Member of the Autodesk Discussion Forum Moderator Program
"Brian A. Locke" wrote in message
news:952AD48EE0DEEF974A5B37C8F3EAF322@in.WebX.maYIadrTaRb...
> I want to insert a autocad dwg into a sketch. The wizard starts and when I
> get to the constrain endpoints I get a error "An unsupported operation was
> attempted" Am I missing something here?
>
> Brian Locke
> Mikros Manufacturing
>
>
Do you have VoloView Express installed? If so did you install it before you installed IV?
Try doing the operation with the files being on the local hard drive instead of across a network.
My only other idea is to run a Repair on your IV installation and if that doesn't fix it then do a full uninstall/reinstall. Remember to delete the Inventor directory after uninstalling. If you are comfortable with working on the Registry then try cleaning it out as well before reinstalling.
I guess you could also post a DWG file to CF to see if someone else can import it just to make sure your DWGs aren't the problem.
I have exactly the same problem. I haveAutocad 2002, Inventor 5.0 and Voloview Express Ver 2 (Build 627) installed and all files are on the same hard disk.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")