Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I wanna create an dynamic simulation containing a cylindrical cam.I've tried 3d contact for the joint but I wanna use another beacause of its slowness...Can U help me ?
----------------------------------------------------------------------------------------- Autodesk Inventor 2019 Certified Professional Autodesk AutoCAD 2013 Certified Professional Certified SolidWorks Professional
I'm not sure if this is the same issue, but I recall a similar issue. It turned out that the groove in the cam had interference with the follower. This penetration caused the 3D contact to run slowly.
If you create the groove geometry with the help of the export trace to sketch command in DS, the interference is much less likely to occur.
As JD already mentioned, we'll need to get a hold of the dataset to provide more help.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")