Hi All
Has anyone had any experience with courses or books by Imaginit?
Thanks
Lou
Solved! Go to Solution.
Solved by DarrenP. Go to Solution.
Yes, I have taken both the in the classroom persea trainings in vault and the P-Now online courses through Imaginit.
What are you looking to find out?
whether they are good as there are many courses and courseware to choose from.They look to have good topics available.So basically were you impressed
Lou
are you talking about the Ascent Courseware?
if so these are very good books
DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
yes they do
i believe i read somewhere they are trying to do the courseware from the ipad and teach from that
saves a ton money then printing them out
DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I personally thought the P-Now courses were very thurough and good.
The classroom ones were lacking a bit.
I was thinking of the classroom courses Autodesk Inventor 2013 Advanced Part Modeling.Have you done this course?
Lou
I did a week long course held by Imaginit. They provided 2 books, classroom tutorials and hands on training. It was overall pretty good! I use the books a lot for reference as they provide pretty good step by step instructions and tutorials. All tutorials performed come with a CD and can be accessed at any time. I would say it has helped me with my advancement in Inventor. I took the Basic Introduction to Solid Modelling.
Hope this helps.
Regards,
now all of their books don't come with a cd anymore
all the datasets are on a a ftp website
the address is found on the inside of the book
DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I'm a little biased on this (since I wrote a few of the exercises) so I'll just add to the ebook conversation...
http://blogs.rand.com/ascent/2012/04/ebooks-in-the-classroom.html
Now I have done an iPad class with the books and it was awesome. The students can subscribe to my notes so when I make omissions or course corrections or make a point about concepts they can instantly see the notes in their iPad version (which also works on a desktop application or Android device). It went over very well.
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.
Mark Flayler - Engagement Engineer
IMAGINiT Manufacturing Solutions Blog: https://resources.imaginit.com/manufacturing-solutions-blog
No I haven't taken these courses in the classroom. I did do the advanced part modeling 2012 in the P-Now on-line course.
The courses I did take were the vault basic and admin. What I found lacking is the admin course never provided
a manual to reference for later times and to follow and markup during the course. Also, the course material didn't get real deep and left a lot of us asking more questions and feeling a complete understanding of the software. In my opinion the time was too short and needed to be longer in order to cover the contents in greater detail.
Can't find what you're looking for? Ask the community or share your knowledge.