Inventor General

Reply
Active Contributor
harold_kennedy
Posts: 29
Registered: ‎11-03-2012
Message 1 of 5 (687 Views)
Accepted Solution

convert to a sheet metal part

687 Views, 4 Replies
11-03-2012 03:50 AM

Hello,

 

The part posted with this question is made with Inventor 2013.I would prefer to make this part with the Sheet Metal tools .Please how would this be made with sheet metal tools and how do i flatten this piece?

 

Best Regards

 

Harold Kennedy

*Expert Elite*
JDMather
Posts: 26,186
Registered: ‎04-20-2006
Message 2 of 5 (681 Views)

Re: convert to a sheet metal part

11-03-2012 05:24 AM in reply to: harold_kennedy

You could simply Convert to Sheet Metal (see attached).  (done in student version - so examine and then delete)

 

or

 

you only need three lines 100, 30, 70 that's it - an open profile and use the Contoured Flange tool to create the bracket and then use the Cut just like you did Extrude.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Contributor
harold_kennedy
Posts: 29
Registered: ‎11-03-2012
Message 3 of 5 (658 Views)

Re: convert to a sheet metal part

11-04-2012 12:23 AM in reply to: harold_kennedy

Mr J.D Mather

 

Thanks for guidance

 

I attached a file using your recommendations

 

Is this correct

 

Harold

*Expert Elite*
mrattray
Posts: 2,456
Registered: ‎09-13-2011
Message 4 of 5 (608 Views)

Re: convert to a sheet metal part

11-05-2012 04:25 AM in reply to: harold_kennedy

You don't have to model bend radii. If you draw your contour flange profile to sharp corners Inventor will automatically draw bends in based on the bend radius specified in your sheetmetal defaults.

Mike (not Matt) Rattray

*Expert Elite*
JDMather
Posts: 26,186
Registered: ‎04-20-2006
Message 5 of 5 (602 Views)

Re: convert to a sheet metal part

11-05-2012 04:39 AM in reply to: harold_kennedy

These parts are not the same.

You used 10mm external bend radius on both bends on first part

and 10mm on one external and on internal bend on second part.

 

As I initially wrote - you need only three lines in that first sketch - that's it.  Nothing more.

 

different.png

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube