I am able to extract an flat pattern (for round to square) but not exactly as the customers drawing.
The original drawing shows some relief in bending lines which i am not able to add in inventor.
after a glance at the attachments you will clearly understand what i want.
Thanks in advance
Solved! Go to Solution.
Without the 3D Information we can't do almost nothing to help.
Thanks for quick reply & sorry for delay from my side.
Attached you can find the 3D deg.
When I see your post, I understand that you want some "space" between the bend lines in the corners.
It can't be round AND made with that relief, though - That would be square with a nice round corner instead, so why do you want it as the customer's drawing?
Unless the customer has produced a drawing specifically for your workshop, you cannot rely on the measurements from that drawing.
I would suggest that you tell the customer that his drawing will result in a square with with big round corners, and ask if that is what he really wants.
If you want a result like his, you'll have to draw half a square instead of half a circle for your second sketch, and then add fillets (although those don't have any dimensions)
You have to ask for the costumer's 3D, because this flat pattern can be for different parts: diferent angles, etc.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.