Ok, I understand.
I think the Autodesk tutorial is kind of misleading, suggesting you can build a single part and use it for multiple applications. When in reality you build the one part, code up all the variations in iLogic, and then go through all of the variations, clicking "Save as" for each one so that you can actually use them in the future.
Thanks for clarifying this mrattray
... go through all of the variations, clicking "Save as" for each one so that you can actually use them in the future.
iParts may be more suitable for what you just described. If you haven't already, look into iParts to see if they can help you get what you need.
But no, a single part file can only have one configuration at a time. iLogic can program the part to take many different forms depending on user input, but it can only be one of those at a time. Component occurrences of the same part file in an assembly are identical copies of each other.
You have a little more flexibility with (sub)assemblies as component occurrences inside another assembly. You can have a single assembly file shown in different configurations (to an extent) through the use of view representations and positional representations. But not with part files.
Just to elaborate - when you create an iPart when you place it into an assembly Inventor asks you for the configuration of the part you want in the assembly. For each new configuration Inventor then automatically "manufactures" a new part from the master iPart. This used to be referred to the iPart Factory in earlier versions of Inventor.
A part like this could also be used as a template file for starting new parts from, rather than using Save As from an existing one each time. If I created a part like the one you're describing, that's probably how I would use it.
What JDMather describes is what I expected from a part parameterized with iLogic. Good to know this exists with iParts - I'll go through the iPart tutorials and help sections.
What JDMather describes....
This one is about as simple as it gets (can do much much more sophisticated use of iParts).
Start a new assembly.
Place Component and select this Die.ipt file.
A dialog box will pop up - examine the tabs.
Go back to the first tab and select the 3mm.
Also in Inventor right mouse button everything to find hidden functionality.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.