Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Threads in detail don't show

9 REPLIES 9
Reply
Message 1 of 10
Anonymous
208 Views, 9 Replies

Threads in detail don't show

I have a drawing where the threads are shown as hidden lines in the section
view, but the detail view of the section does not show them. Furthermore, I
can't get the Hole/Thread Notes tool to work to define the threads in the
section view. Can anyone tell me why and how to fix it?

Check out CF with the same subject.

Thanks,

-Mike
9 REPLIES 9
Message 2 of 10
ddelaiarro
in reply to: Anonymous

great question. I'd love to see how to do this as I deal a lot with threaded parts.
Message 3 of 10
Anonymous
in reply to: Anonymous

See CF under your post. Mine seem to show up... ???

Also you cannot put a hole note on a section view. I don't think you ever
could...

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
-----------------------------------------
"mpower" wrote in message
news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> I have a drawing where the threads are shown as hidden lines in the
section
> view, but the detail view of the section does not show them. Furthermore,
I
> can't get the Hole/Thread Notes tool to work to define the threads in the
> section view. Can anyone tell me why and how to fix it?
>
> Check out CF with the same subject.
>
> Thanks,
>
> -Mike
>
>
Message 4 of 10
Anonymous
in reply to: Anonymous

Trails don't show up in a detail view either.

Kathy Johnson

"Sean Dotson" wrote in message
news:5E1F24CB71407B135CDC8E8050512674@in.WebX.maYIadrTaRb...
> See CF under your post. Mine seem to show up... ???
>
> Also you cannot put a hole note on a section view. I don't think you ever
> could...
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> http://www.sdotson.com/faq.html
> -----------------------------------------
> "mpower" wrote in message
> news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> > I have a drawing where the threads are shown as hidden lines in the
> section
> > view, but the detail view of the section does not show them.
Furthermore,
> I
> > can't get the Hole/Thread Notes tool to work to define the threads in
the
> > section view. Can anyone tell me why and how to fix it?
> >
> > Check out CF with the same subject.
> >
> > Thanks,
> >
> > -Mike
> >
> >
>
>
Message 5 of 10
Anonymous
in reply to: Anonymous

Uhm.... why?

"KJohnson" wrote in message
news:FAFD923918003BF31926A58262EE433B@in.WebX.maYIadrTaRb...
> Trails don't show up in a detail view either.
>
> Kathy Johnson
>
> "Sean Dotson" wrote in message
> news:5E1F24CB71407B135CDC8E8050512674@in.WebX.maYIadrTaRb...
> > See CF under your post. Mine seem to show up... ???
> >
> > Also you cannot put a hole note on a section view. I don't think you
ever
> > could...
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > Check the Inventor FAQ for most common questions
> > http://www.sdotson.com/faq.html
> > -----------------------------------------
> > "mpower" wrote in message
> > news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> > > I have a drawing where the threads are shown as hidden lines in the
> > section
> > > view, but the detail view of the section does not show them.
> Furthermore,
> > I
> > > can't get the Hole/Thread Notes tool to work to define the threads in
> the
> > > section view. Can anyone tell me why and how to fix it?
> > >
> > > Check out CF with the same subject.
> > >
> > > Thanks,
> > >
> > > -Mike
> > >
> > >
> >
> >
>
>
Message 6 of 10
Anonymous
in reply to: Anonymous

Sean,

I tried to duplicate your method, and it worked file, but if the detail
definition circle does not enclose the entire diameter, IV has some
problems. See CF under my post.

"Sean Dotson" wrote in message
news:5E1F24CB71407B135CDC8E8050512674@in.WebX.maYIadrTaRb...
> See CF under your post. Mine seem to show up... ???
>
> Also you cannot put a hole note on a section view. I don't think you ever
> could...
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> http://www.sdotson.com/faq.html
> -----------------------------------------
> "mpower" wrote in message
> news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> > I have a drawing where the threads are shown as hidden lines in the
> section
> > view, but the detail view of the section does not show them.
Furthermore,
> I
> > can't get the Hole/Thread Notes tool to work to define the threads in
the
> > section view. Can anyone tell me why and how to fix it?
> >
> > Check out CF with the same subject.
> >
> > Thanks,
> >
> > -Mike
> >
> >
>
>
Message 7 of 10
Anonymous
in reply to: Anonymous

Sounds like a bug then...

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
-----------------------------------------
"mpower" wrote in message
news:8A5E7771F37D564620D11D84D8A4D053@in.WebX.maYIadrTaRb...
> Sean,
>
> I tried to duplicate your method, and it worked file, but if the detail
> definition circle does not enclose the entire diameter, IV has some
> problems. See CF under my post.
>
> "Sean Dotson" wrote in message
> news:5E1F24CB71407B135CDC8E8050512674@in.WebX.maYIadrTaRb...
> > See CF under your post. Mine seem to show up... ???
> >
> > Also you cannot put a hole note on a section view. I don't think you
ever
> > could...
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > Check the Inventor FAQ for most common questions
> > http://www.sdotson.com/faq.html
> > -----------------------------------------
> > "mpower" wrote in message
> > news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> > > I have a drawing where the threads are shown as hidden lines in the
> > section
> > > view, but the detail view of the section does not show them.
> Furthermore,
> > I
> > > can't get the Hole/Thread Notes tool to work to define the threads in
> the
> > > section view. Can anyone tell me why and how to fix it?
> > >
> > > Check out CF with the same subject.
> > >
> > > Thanks,
> > >
> > > -Mike
> > >
> > >
> >
> >
>
>
Message 8 of 10
Anonymous
in reply to: Anonymous

Because it does?

Kathy Johnson

"mpower" wrote in message
news:11C4AE3BEADAE9429039BD2F04B84393@in.WebX.maYIadrTaRb...
> Uhm.... why?
>
> "KJohnson" wrote in message
> news:FAFD923918003BF31926A58262EE433B@in.WebX.maYIadrTaRb...
> > Trails don't show up in a detail view either.
> >
> > Kathy Johnson
> >
> > "Sean Dotson" wrote in message
> > news:5E1F24CB71407B135CDC8E8050512674@in.WebX.maYIadrTaRb...
> > > See CF under your post. Mine seem to show up... ???
> > >
> > > Also you cannot put a hole note on a section view. I don't think you
> ever
> > > could...
> > >
> > > --
> > > Sean Dotson, PE
> > > http://www.sdotson.com
> > > Check the Inventor FAQ for most common questions
> > > http://www.sdotson.com/faq.html
> > > -----------------------------------------
> > > "mpower" wrote in message
> > > news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> > > > I have a drawing where the threads are shown as hidden lines in the
> > > section
> > > > view, but the detail view of the section does not show them.
> > Furthermore,
> > > I
> > > > can't get the Hole/Thread Notes tool to work to define the threads
in
> > the
> > > > section view. Can anyone tell me why and how to fix it?
> > > >
> > > > Check out CF with the same subject.
> > > >
> > > > Thanks,
> > > >
> > > > -Mike
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Message 9 of 10
Anonymous
in reply to: Anonymous

What I mean is I think it's silly that you can't put a hole note on a
section view nor do the trails show up. Don't you?

"KJohnson" wrote in message
news:D4E9FF22CD9B4BA7E0F3BFB828750058@in.WebX.maYIadrTaRb...
> Because it does?
>
> Kathy Johnson
>
> "mpower" wrote in message
> news:11C4AE3BEADAE9429039BD2F04B84393@in.WebX.maYIadrTaRb...
> > Uhm.... why?
> >
> > "KJohnson" wrote in message
> > news:FAFD923918003BF31926A58262EE433B@in.WebX.maYIadrTaRb...
> > > Trails don't show up in a detail view either.
> > >
> > > Kathy Johnson
> > >
> > > "Sean Dotson" wrote in message
> > > news:5E1F24CB71407B135CDC8E8050512674@in.WebX.maYIadrTaRb...
> > > > See CF under your post. Mine seem to show up... ???
> > > >
> > > > Also you cannot put a hole note on a section view. I don't think
you
> > ever
> > > > could...
> > > >
> > > > --
> > > > Sean Dotson, PE
> > > > http://www.sdotson.com
> > > > Check the Inventor FAQ for most common questions
> > > > http://www.sdotson.com/faq.html
> > > > -----------------------------------------
> > > > "mpower" wrote in message
> > > > news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> > > > > I have a drawing where the threads are shown as hidden lines in
the
> > > > section
> > > > > view, but the detail view of the section does not show them.
> > > Furthermore,
> > > > I
> > > > > can't get the Hole/Thread Notes tool to work to define the threads
> in
> > > the
> > > > > section view. Can anyone tell me why and how to fix it?
> > > > >
> > > > > Check out CF with the same subject.
> > > > >
> > > > > Thanks,
> > > > >
> > > > > -Mike
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Message 10 of 10
Anonymous
in reply to: Anonymous

I believe that technically, it's improper to call out a hole in the section
view. Trails..who knows....

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
-----------------------------------------
"mpower" wrote in message
news:7278EB9780A4263846798E2CEE16D364@in.WebX.maYIadrTaRb...
> What I mean is I think it's silly that you can't put a hole note on a
> section view nor do the trails show up. Don't you?
>
> "KJohnson" wrote in message
> news:D4E9FF22CD9B4BA7E0F3BFB828750058@in.WebX.maYIadrTaRb...
> > Because it does?
> >
> > Kathy Johnson
> >
> > "mpower" wrote in message
> > news:11C4AE3BEADAE9429039BD2F04B84393@in.WebX.maYIadrTaRb...
> > > Uhm.... why?
> > >
> > > "KJohnson" wrote in message
> > > news:FAFD923918003BF31926A58262EE433B@in.WebX.maYIadrTaRb...
> > > > Trails don't show up in a detail view either.
> > > >
> > > > Kathy Johnson
> > > >
> > > > "Sean Dotson" wrote in message
> > > > news:5E1F24CB71407B135CDC8E8050512674@in.WebX.maYIadrTaRb...
> > > > > See CF under your post. Mine seem to show up... ???
> > > > >
> > > > > Also you cannot put a hole note on a section view. I don't think
> you
> > > ever
> > > > > could...
> > > > >
> > > > > --
> > > > > Sean Dotson, PE
> > > > > http://www.sdotson.com
> > > > > Check the Inventor FAQ for most common questions
> > > > > http://www.sdotson.com/faq.html
> > > > > -----------------------------------------
> > > > > "mpower" wrote in message
> > > > > news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> > > > > > I have a drawing where the threads are shown as hidden lines in
> the
> > > > > section
> > > > > > view, but the detail view of the section does not show them.
> > > > Furthermore,
> > > > > I
> > > > > > can't get the Hole/Thread Notes tool to work to define the threa
ds
> > in
> > > > the
> > > > > > section view. Can anyone tell me why and how to fix it?
> > > > > >
> > > > > > Check out CF with the same subject.
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > > -Mike
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report