Inventor General

Reply
*Farstad, Roger
Message 1 of 5 (24 Views)

Suggestion to Autodesk

24 Views, 4 Replies
11-21-2002 07:31 PM
In DesignSpace (FEA software from ANSYS) they have placed the coordinate
axis (tripod) at the lower corner in the view, just like IV have. But in DS
it is possible to rotate the view by click on the axis.

My suggestion is to place the exixting cube (F4 + space) in the lower corner
in a smaller verison. It could be switched on/off like the tripod is today
(appl options).



Roger
*Walker, Russ
Message 2 of 5 (24 Views)

Re: Suggestion to Autodesk

11-22-2002 01:19 AM in reply to: *Farstad, Roger
I also like the fact that it also indicates "X", "Y" and "Z" whilst hovering
over the corresponding arrow.

-Russ


"Roger Farstad" wrote in message
news:B50EBEBC814B2AFF7B9FDE4FA734AE01@in.WebX.maYIadrTaRb...
> In DesignSpace (FEA software from ANSYS) they have placed the coordinate
> axis (tripod) at the lower corner in the view, just like IV have. But in
DS
> it is possible to rotate the view by click on the axis.
>
> My suggestion is to place the exixting cube (F4 + space) in the lower
corner
> in a smaller verison. It could be switched on/off like the tripod is today
> (appl options).
>
>
>
> Roger
>
>
*Farstad, Roger
Message 3 of 5 (24 Views)

Re: Suggestion to Autodesk

11-22-2002 02:17 AM in reply to: *Farstad, Roger
To clarify a possible missunderstanding,

it should be possible to rotate the view by clicking on the arrows on this
cube at the lower left or right corner.
Roger
"Roger Farstad" wrote in message
news:B50EBEBC814B2AFF7B9FDE4FA734AE01@in.WebX.maYIadrTaRb...
> In DesignSpace (FEA software from ANSYS) they have placed the coordinate
> axis (tripod) at the lower corner in the view, just like IV have. But in
DS
> it is possible to rotate the view by click on the axis.
>
> My suggestion is to place the exixting cube (F4 + space) in the lower
corner
> in a smaller verison. It could be switched on/off like the tripod is today
> (appl options).
>
>
>
> Roger
>
>
*Crain, Ron
Message 4 of 5 (24 Views)

Re: Suggestion to Autodesk

11-23-2002 01:09 AM in reply to: *Farstad, Roger
Would you REALLY like time and money spent on this feature or would you like
them to invest that time and $'s into some more usefull features like
grouping parts in the browser, making Inventor perform better with GeForce
cards, etc?

"Roger Farstad" wrote in message
news:B50EBEBC814B2AFF7B9FDE4FA734AE01@in.WebX.maYIadrTaRb...
> In DesignSpace (FEA software from ANSYS) they have placed the coordinate
> axis (tripod) at the lower corner in the view, just like IV have. But in
DS
> it is possible to rotate the view by click on the axis.
>
> My suggestion is to place the exixting cube (F4 + space) in the lower
corner
> in a smaller verison. It could be switched on/off like the tripod is today
> (appl options).
>
>
>
> Roger
>
>
*Farstad, Roger
Message 5 of 5 (24 Views)

Re:

11-24-2002 02:32 PM in reply to: *Farstad, Roger
Ron

I found this functionality really useful in other program, so my answer is
yes. I know this is a minor issue, it would be used a lot. Changes and fine
tuning, could be just as effective as other improvements, and I think most
of the programming work needed for this is already done.

Inventor have piced up the best functions from other software packages, so
why don't continue with this.


Roger


"Ron Crain" wrote in message
news:9344AE9E65488DD846DA629165B86030@in.WebX.maYIadrTaRb...
> Would you REALLY like time and money spent on this feature or would you
like
> them to invest that time and $'s into some more usefull features like
> grouping parts in the browser, making Inventor perform better with GeForce
> cards, etc?
>
> "Roger Farstad" wrote in message
> news:B50EBEBC814B2AFF7B9FDE4FA734AE01@in.WebX.maYIadrTaRb...
> > In DesignSpace (FEA software from ANSYS) they have placed the coordinate
> > axis (tripod) at the lower corner in the view, just like IV have. But in
> DS
> > it is possible to rotate the view by click on the axis.
> >
> > My suggestion is to place the exixting cube (F4 + space) in the lower
> corner
> > in a smaller verison. It could be switched on/off like the tripod is
today
> > (appl options).
> >
> >
> >
> > Roger
> >
> >
>
>

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube