Inventor General

Inventor General

*Expert Elite*
Posts: 2,456
Registered: ‎09-13-2011
Message 21 of 27 (509 Views)

Re: Square to Round Transition Options?

04-20-2012 11:57 AM in reply to: jeanchile

Ah, that is true. You're not being a PITA, by the way, this isn't my job to post here I just do it in the hopes of learning something.

With some testing I found that -2 Thicknessses results in an OD of 27.973 in vs your 28. This is using 12ga.

I made a sketch inside of the transition file with a skeletal representation of the profile of one of the transitions (drawn to OD). I put a driven dimension to the id and named it "id". Setting the transition then to id (the parameter) gave me 28.001 on the OD.

I also cam up with this nightmare formula for calculating it directly, but IV doesn't understand the inverse tangent. *(I'm sure I facked it all up anyways):

id = cos(tan^-1(h/((l-d)/2)))*T

where h = height, l = length, d = diameter, T = thickness

Mike (not Matt) Rattray

Active Contributor
Posts: 30
Registered: ‎11-19-2008
Message 22 of 27 (503 Views)

Re: Square to Round Transition Options?

04-20-2012 12:26 PM in reply to: mrattray

Can you just use atan for the inverse tangent?

Valued Mentor
Posts: 481
Registered: ‎08-02-2003
Message 23 of 27 (491 Views)

Re: Square to Round Transition Options?

04-20-2012 05:44 PM in reply to: jeanchile

As I said - you need to suppress the Delete Face feature in the feature tree to get the flat pattern to work. Here is an iPart which has two entries in the table. One of them - for producing the Flat Pattern only. But if you don't mind the small notch in the corner - then you don't need an iPart.

Regards,

Igor.

jeanchile wrote:

Igor,

On my computer your part doesn't completely flatten all the way and I can't figure out why. Does yours go completely flat?

Web: www.meqc.com.au
Valued Mentor
Posts: 722
Registered: ‎11-10-2009
Message 24 of 27 (465 Views)

Re: Square to Round Transition Options?

04-27-2012 08:51 AM in reply to: IgorMir

My apologies Igor (on two fronts). One for the fact that I read that part of your post but by the time I was free to open it I had forgotten, and two for replying so late. I have been out of town.

Thank you (and all the others) for the wonderful examples and usable information. Utilizing a "mixed bag" approach to the items posted here I was able to produce a file the "bend guy" was looking for and it worked great.

Now, I just need to figure out a way for me and my cohorts to convince him to do it the "normal" way.

Thanks again!

Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
Valued Mentor
Posts: 481
Registered: ‎08-02-2003
Message 25 of 27 (446 Views)

Re: Square to Round Transition Options?

04-28-2012 10:48 PM in reply to: jeanchile

Hi Jean,

I am glad it worked out for you OK.

Best Regards,

Igor.

Web: www.meqc.com.au
Valued Mentor
Posts: 722
Registered: ‎11-10-2009
Message 26 of 27 (423 Views)

Re: Square to Round Transition Options?

04-30-2012 12:21 PM in reply to: IgorMir

Here's the picture of the transition fit together. They said it went together like a "swiss watch". I think that means it was okay.

Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
Valued Mentor
Posts: 481
Registered: ‎08-02-2003
Message 27 of 27 (409 Views)

Re: Square to Round Transition Options?

04-30-2012 05:36 PM in reply to: jeanchile

Looks just like we have designed it!

Best Regards,

Igor.

Web: www.meqc.com.au

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Maintenance Subscription Resources

Upgrading to a 2015 product? Make sure to check these out 1st!

Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.