Inventor General

Reply
Valued Contributor
Posts: 63
Registered: ‎11-07-2003
Message 1 of 9 (302 Views)
Accepted Solution

Section View depth

302 Views, 8 Replies
02-02-2005 08:06 AM
When I try to edit the section view depth my only choice is full. The depth is grayed. Is there a setting to turn on to allow this operation?
*Andrew Faix \(Autodesk\)
Message 2 of 9 (302 Views)

Re: Section View depth

02-02-2005 08:13 AM in reply to: cdyck
Are you selecing "Distance" from the first drop-down list? -- Andrew Faix Product Designer - Inventor Drawing Manager Autodesk "cdyck" wrote in message news:24823401.1107360414035.JavaMail.jive@jiveforum1.autodesk.com... > When I try to edit the section view depth my only choice is full. The > depth is grayed. Is there a setting to turn on to allow this operation?
Valued Contributor
Posts: 63
Registered: ‎11-07-2003
Message 3 of 9 (302 Views)

Re: Section View depth

02-02-2005 11:35 AM in reply to: cdyck
When I pick the dropdown box that says "FULL" I am not offered any other choice.
*Andrew Faix \(Autodesk\)
Message 4 of 9 (302 Views)

Re: Section View depth

02-03-2005 06:26 AM in reply to: cdyck
I can't think of any condition that would prevent you from doing this? Is this problem file-specific? Please try creating a new drawing and placing a base view of a different model, create a section view and see if the problem persists. If this is file-specific, please post or send me the dataset (model and drawing). andrew.faix@autodesk.com Thanks, -- Andrew Faix Product Designer - Inventor Drawing Manager Autodesk "cdyck" wrote in message news:28970542.1107372956343.JavaMail.jive@jiveforum2.autodesk.com... > When I pick the dropdown box that says "FULL" I am not offered any other > choice.
Valued Contributor
Posts: 63
Registered: ‎11-07-2003
Message 5 of 9 (302 Views)

Re: Section View depth

02-03-2005 08:19 AM in reply to: cdyck
I checked to see if this problem is file specific or project specific. It is neither, it doesn't offer me the option for depth .
By the way I am using Inventor 9 Pro. but this project is not using the Pro icon, so I am assuming it is normal Inventor 9.
*Andrew Faix \(Autodesk\)
Message 6 of 9 (302 Views)

Re: Section View depth

02-03-2005 09:49 AM in reply to: cdyck
Well, you can send me the file and I can check it, but it seems that this problem is local to your machine. Again, there should be no condition that would prevent you from changing from a full section to a user-defined depth. -- Andrew Faix Product Designer - Inventor Drawing Manager Autodesk "cdyck" wrote in message news:4661559.1107447629610.JavaMail.jive@jiveforum2.autodesk.com... >I checked to see if this problem is file specific or project specific. It >is neither, it doesn't offer me the option for depth . > By the way I am using Inventor 9 Pro. but this project is not using the > Pro icon, so I am assuming it is normal Inventor 9.
Member
Posts: 3
Registered: ‎04-04-2013
Message 7 of 9 (208 Views)

Re: Section View depth

04-04-2013 07:59 AM in reply to: cdyck

right click on view, edit section properties.

*Expert Elite*
Posts: 25,335
Registered: ‎04-20-2006
Message 8 of 9 (200 Views)

Re: Section View depth

04-04-2013 08:07 AM in reply to: Nakose1

Hopefully the OP solved this problem 8 years ago.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
Posts: 3
Registered: ‎04-04-2013
Message 9 of 9 (195 Views)

Re: Section View depth

04-04-2013 08:09 AM in reply to: JDMather
Hopefully, but I didn't see an answer so I posted.

Ivan E. Bear, Sr.
Contract Designer I
Matrix PDM Engineering
Phone: 918.624.6238

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube