After further testing, I found that it only happens when my program does the
save as. I will have to report it to Autodesk and see what they say about
it.
"Sean Dotson" wrote in message
news:0D889F59ADB0040CBDC7BB50A57762A4@in.WebX.maYIadrTaRb...
> Ah..you have a VBA script. That changes things...
>
> --
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> "Randy Sanders" <7randys7@7striker7-7systems7.com> wrote in message
> news:BBF6687D6AE208E989250AF2647CEDA6@in.WebX.maYIadrTaRb...
> > Yes I am. I originally posted this in the customization group because I
am
> > doing the save as through my program. I will check it tomorrow and see
if
> it
> > is only when my program does the saveas.
> >
> > "Sean Dotson" wrote in message
> > news:AB80FF2F70D568EAB4DE1071601598C5@in.WebX.maYIadrTaRb...
> > > I am not seeing this. Are you running SP1? Perhaps it was a bug that
> was
> > > fixed by SP1...
> > >
> > > --
> > > Sean Dotson, PE
> > > http://www.sdotson.com
> > > Check the Inventor FAQ for most common questions
> > > -----------------------------------------
> > > "Randy Sanders" <7randys7@7striker7-7systems7.com> wrote in message
> > > news:79703BCC341D3EAF763094A55D277B81@in.WebX.maYIadrTaRb...
> > > > I have found that when I do a save as to a different name in a
> different
> > > > directory, it changes the part number, in the iProperties, for the
> > current
> > > > part to the name I saved it to. Do anyone else experience this? Why
> > would
> > > > they change the current part, if they are not going to change it to
> the
> > > save
> > > > as part like every other product does
> > > >
> > > >
> > >
> > >
> >
> >
>
>
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")