Inventor General

Reply
Active Member
mariappan.u
Posts: 7
Registered: ‎08-26-2011
Message 1 of 7 (393 Views)

STP FILE SHEETMETAL FLAT PATTERN

393 Views, 6 Replies
12-06-2011 02:32 AM

Hi all,

 

I have stp file to convert sheetmetal flat pattern.i can convert some portion but i cant convert particular portions.

 

see attached file.

 

 

waitng for solution.

 

 

*Expert Elite*
Posts: 25,276
Registered: ‎04-20-2006
Message 2 of 7 (383 Views)

Re: STP FILE SHEETMETAL FLAT PATTERN

12-06-2011 04:43 AM in reply to: mariappan.u

mariappan.u wrote:

 

waitng for solution.

  


You might be waiting a while - of course Inventor will not unfold a jpg image. 

You will need to attach the ipt file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
mariappan.u
Posts: 7
Registered: ‎08-26-2011
Message 3 of 7 (350 Views)

Re: STP FILE SHEETMETAL FLAT PATTERN

12-06-2011 08:00 PM in reply to: JDMather

I CANT ATTACH STP FILE IN THIS FORUM

*Expert Elite*
Posts: 25,276
Registered: ‎04-20-2006
Message 4 of 7 (341 Views)

Re: STP FILE SHEETMETAL FLAT PATTERN

12-07-2011 04:09 AM in reply to: mariappan.u

Right click on the file name and select Send to Compressed (zipped) Folder

and attach the resulting *.zip file here

or

attach the translated *.ipt file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
mariappan.u
Posts: 7
Registered: ‎08-26-2011
Message 5 of 7 (321 Views)

Re: STP FILE SHEETMETAL FLAT PATTERN

12-08-2011 05:20 PM in reply to: mariappan.u

here is the attachment.

*Expert Elite*
Posts: 25,276
Registered: ‎04-20-2006
Message 6 of 7 (306 Views)

Re: STP FILE SHEETMETAL FLAT PATTERN

12-09-2011 05:05 AM in reply to: mariappan.u

If you look in this area from the right side this face (and I assume the opposite face) is warped.

This was hard to see from the jpg you originally posted.

 

You will have to Delete Face and rebuild that area of the part. 

 

Warped Faces.png

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
Posts: 25,276
Registered: ‎04-20-2006
Message 7 of 7 (297 Views)

Re: STP FILE SHEETMETAL FLAT PATTERN

12-09-2011 06:56 AM in reply to: JDMather

Considering manufacturing tolerance - perhaps this is close enough.

 

 

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube