Re. Grapichs discussion!!!

[Anonymous]

It's me again.
Today I did a test on Engine.iam again. This time I used the proposed
Default settings from Andy Shelter together with "Full Optimization".
Display set to
1280x1028 and 16 bit Colors on my Creative 3DBlaster4 MX420 card.
Results are now:

Inventor6 Grapics Benchmark

03.12.02 09:50:16

Shaded = 24.9 FPS
Hidden = 7.8 FPS
Wireframe = 12.2 FPS
Multiple Windows = 28.1 FPS
Average = 18.3 FPS

Compared to:
Inventor6 Grapics Benchmark

02.12.02 11:08:32

Shaded = 36.5 FPS
Hidden = 10.8 FPS
Wireframe = 72.5 FPS
Multiple Windows = 42.8 FPS
Average = 40.7 FPS


Based on this I have to say that by changing the default settings to what I
have increases speed and handling of IV dramatically.
My settings are based upon a document by Richard Rankin called "Working with
Large Assemblies in Autodesk Inventor".

Since the changes are just cosmetic and don't inflict on my work I suggest
that others try this.

Regards

Ole Christer Lilledal

[Anonymous]

higer numbers are better, so your other scores are much better than your
last scores.
try changing to 32 bit color again.


"Ole Christer Lilledal" wrote in message
news:4B91E2820F6BDDDE0BA3609ABBD0EA19@in.WebX.maYIadrTaRb...
> It's me again.
> Today I did a test on Engine.iam again. This time I used the proposed
> Default settings from Andy Shelter together with "Full Optimization".
> Display set to
> 1280x1028 and 16 bit Colors on my Creative 3DBlaster4 MX420 card.
> Results are now:
>
> Inventor6 Grapics Benchmark
>
> 03.12.02 09:50:16
>
> Shaded = 24.9 FPS
> Hidden = 7.8 FPS
> Wireframe = 12.2 FPS
> Multiple Windows = 28.1 FPS
> Average = 18.3 FPS
>
> Compared to:
> Inventor6 Grapics Benchmark
>
> 02.12.02 11:08:32
>
> Shaded = 36.5 FPS
> Hidden = 10.8 FPS
> Wireframe = 72.5 FPS
> Multiple Windows = 42.8 FPS
> Average = 40.7 FPS
>
>
> Based on this I have to say that by changing the default settings to what
I
> have increases speed and handling of IV dramatically.
> My settings are based upon a document by Richard Rankin called "Working
with
> Large Assemblies in Autodesk Inventor".
>
> Since the changes are just cosmetic and don't inflict on my work I suggest
> that others try this.
>
> Regards
>
> Ole Christer Lilledal
>
>
>
>