I have this problem at times as well. However, the garbled text (7 showing
like C) will preview and print garbled. With mine, exiting Inventor will
normally clear it up. Exiting the drawing only does not help.
Ed R
"Ron Crain" wrote in message
news:05DA7F5D59D2C38C31397EF8B1C39D63@in.WebX.maYIadrTaRb...
> I am also seeing garbled text in IDW's - printing is fine. Shut down
> Inventor and restart clears it up mostly but it is a PAIN to do this
> frequently.
>
> "Walt Jaquith" wrote in message
> news:1C8C039437616873DB200F59739D2501@in.WebX.maYIadrTaRb...
> > It's my day to post screen caps, I guess.
> >
> > In the center of pic there are two driven dimensions. One is 1.375",
and
> > the other is .438". If you look close you can see that the left
> parenthesis
> > is a "2", or at least part of a two, and the right one is a "3". This
is
> a
> > variation on the scrambled text problem that I've never seen. As with
the
> > other scrambled text problems we've seen, restarting Inventor fixed the
> > problem.
> >
> > I was really hoping that SP1 would put this one to bed :-2
> >
> > WJ
> >
> >
>
>