Inventor General

## Inventor General

Member
Posts: 3
Registered: ‎11-06-2012
Message 1 of 5 (205 Views)

# Pure tortion

205 Views, 4 Replies
11-06-2012 12:59 PM

Why in pure tortion of a round beam one diameter increases in size. In theory it shouldn't. I just put a torque on one side and fixed constrained another end.  Is this due to the way, how inventor solves it? Is there a way to minimize it?

Valued Contributor
Posts: 93
Registered: ‎06-09-2008
Message 2 of 5 (197 Views)

# Re: Pure tortion

11-06-2012 01:27 PM in reply to: SNOWV

This thread provides a good explanation:

Basically, it's just an artifact of Inventor's scaling methods.  Displacement scaling is not equivalent to increasing the torque on the part.

-Using Autodesk Inventor Professional 2012
Member
Posts: 3
Registered: ‎11-06-2012
Message 3 of 5 (157 Views)

# Re: Pure tortion

11-06-2012 09:51 PM in reply to: nannerdw

I saw that post, but it still count's as not answered. Is there a way to minimize this effect and can I believe stress results?

*Expert Elite*
Posts: 3,881
Registered: ‎04-27-2005
Message 4 of 5 (132 Views)

# Re: Pure tortion

11-07-2012 05:31 AM in reply to: SNOWV

In "theory" are you saying that the shaft diameter should not expand?  What theory are you using?

If you are having a problem with the way Inventor displays this, you can change the scaling to "Undeformed" if you don't want to see the deformation.

Kirk A.

Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1
Vault Basic 2013

Member
Posts: 3
Registered: ‎11-06-2012
Message 5 of 5 (125 Views)

# Re: Pure tortion

11-07-2012 06:31 AM in reply to: SNOWV

Well, that is the definition of pure torsion. In theory of pure tortion, each cross section along z axis is exposed to the same momentum and deplanation doesn't occure.

Well, now I think that Inventor does it in reality, not theoretically.

Recently Solved

Inventor