Inventor General

Reply
Valued Contributor
jeff.noel
Posts: 73
Registered: ‎02-16-2012
Message 1 of 3 (98 Views)

Publish DWF of assembly with pipe runs

98 Views, 2 Replies
06-27-2012 02:15 PM

Hello,

 

I've been working on putting all Pneumatic/Hydraulic/Electrical runs into our models lately, and while the modelling portion of it (actually making the runs) is fairly straight forward, it seems that documenting it in a way that the shop can easily work with it is another story.

 

Due to the large size of the assembly and amount of runs we have, it is difficult to capture in 2D printed drawings.

 

We are thinking now that the best way to go about it will be to have a computer in the shop that someone will be trained to use, and can use to navigate around the model, inspecting each run as they need.

 

We do use Vault, so I think our solution is going to be to have our visualization files (dwf) automatically sent to a network location that can be accessed by the shop.

 

Now i am having issues with actually naming each run, so that instead of it saying Route 10/Flexible Hose 6 that it says something actually useful such as "Supply Gladhand to Filter".  I am unable to rename any of the routes (I can rename the Runs though), so I figured I would put a description into the iProperties of the Flexible Hose portion of each route, and export the object properties when making the dwf.

 

Now, when I select a solid part that I made in Inventor, I can see its description in the Object Properties of design review no problem, but if I select a hose in design review, the only Object Properties i see are its Center of Gravity.

 

Is there any way to get a semi-useful description into a dwf for a tube/pipe run, or am I out of luck?  Thanks, 

Product Support
bobvdd
Posts: 527
Registered: ‎11-23-2005
Message 2 of 3 (84 Views)

Re: Publish DWF of assembly with pipe runs

06-28-2012 06:00 PM in reply to: jeff.noel

You can rename the route if you activate the run that contains that route.

Slow clicking in the browser worked for me and the renamed route is visible in the dwf file in ADR.

 

Bob

*Expert Elite*
blair
Posts: 3,934
Registered: ‎11-13-2006
Message 3 of 3 (79 Views)

Re: Publish DWF of assembly with pipe runs

06-28-2012 09:48 PM in reply to: bobvdd

If you do a complete DWFx publish, you will get the model along with all the LOD's of the model (if you select complete).

 

We isolate all our air-line runs in a separate LOD (easier for drawings). If you do the publish complete to DWF from the IDW, you will get all your IDW pages as well as all the LOD's in the IAM.

 

We use Win7 tablets with DWF viewer on them. A couple of WAP's throughout the facility and all the information is accessible on the shop floor.

 

We have set the user logins for the tablets to only access a mapped directory on the server. All our drawings are then published to this directory.

 

Our ERP system places the drawing number on the job order, so it's rather easy for the shop to scroll down and find the correct drawing number.

 

Not sure if it works of View Reps for the solid model if they get published.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 up1 PDSU / Sim Mech 2015 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 335.23
SpacePilot Pro 3.17.7, 6.17., 4.11

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube