Inventor General

Reply
*Expert Elite*
LT.Rusty
Posts: 628
Registered: ‎10-23-2012
Message 11 of 19 (388 Views)

Re: Post your "One Button"!

11-16-2012 02:14 PM in reply to: blair

This is my one button ...

 

 

myonebutton.jpg


___________________________________________________________

Product Design Suite Ultimate 2013, 2014

Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / 2xRadeonHD 4870 in CrossfireX
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)

Valued Mentor
Posts: 677
Registered: ‎05-29-2009
Message 12 of 19 (363 Views)

Re: Post your "One Button"!

11-17-2012 05:22 AM in reply to: LT.Rusty

Seconded - would really like a button to Suspend error reporting

 

So annoying when I am fixing errors to have to constantly dismiss the error messages.  I know I have errors that's why I am fixing them !!!!  Or maybe change the Accept button in that message to 'Yes you told me already'

Mentor
MikahB
Posts: 198
Registered: ‎10-11-2009
Message 13 of 19 (345 Views)

Re: Post your "One Button"!

11-17-2012 07:59 PM in reply to: khosking
Thirded for Rusty's suggestion.
Mikah Barnett
All Angles Design
Product Design Suite Ultimate 2014
Windows 7 Professional x64
Intel i7-3770k @ 4.5GHz
32GB DDR3-2400 RAM
GeForce GTX 670 4GB
*Expert Elite*
Mark_Wigan
Posts: 436
Registered: ‎03-07-2006
Message 14 of 19 (289 Views)

Re: Post your "One Button"!

12-04-2012 04:15 AM in reply to: MikahB

fourth for rusty error reporting button...

 

 

maybe if we tick "don,t tell me again unless i ask you to", the red cross turns to grey cross. That way we can track our progress if we are working on a large assembly.

best regards,
- Mark

PDSU 2014 Windows 7, 64bit. (please consider Kudos or Tag as Solved if your issue is sorted)

Contributor
Posts: 11
Registered: ‎05-17-2010
Message 15 of 19 (284 Views)

Re: Post your "One Button"!

12-04-2012 04:23 AM in reply to: khosking

One button for "Clash check" for entire model.

 

That would be nice

Inventor 2011 (x64)
Productstream Professional 2011 (x64)
Windows 7 (x64)

Product design suite Professional 2013
*Pro
jletcher
Posts: 1,860
Registered: ‎05-18-2011
Message 16 of 19 (268 Views)

Re: Post your "One Button"!

12-04-2012 05:37 AM in reply to: mnthailand

Bug fix.JPG


Please mark this response as "Accept as Solution" if it answers your question.

James Letcher
2012 Factory Design Suite ( will not load 2013)
What happen to my Inventor :-(
*Expert Elite*
blair
Posts: 3,634
Registered: ‎11-13-2006
Message 17 of 19 (238 Views)

Re: Post your "One Button"!

12-04-2012 04:24 PM in reply to: LT.Rusty

You mean this error:

Error01.jpg

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 PDSU / Sim Mech 2015 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 335.23
SpacePilot Pro 3.17.7, 6.17., 4.11
Distinguished Contributor
andrewiv
Posts: 619
Registered: ‎09-21-2006
Message 18 of 19 (205 Views)

Re: Post your "One Button"!

12-05-2012 09:23 AM in reply to: LT.Rusty

They actually have that button.  It's located in the application options under the  prompts tab.

pre-existing problems.jpg

Inventor Professional 2014 SP1
*Expert Elite*
LT.Rusty
Posts: 628
Registered: ‎10-23-2012
Message 19 of 19 (201 Views)

Re: Post your "One Button"!

12-05-2012 09:26 AM in reply to: andrewiv

Doesn't hide dimension broken dimensions problems, or at least not on a consistent basis.  That's just about the only error message that you can't suppress.


___________________________________________________________

Product Design Suite Ultimate 2013, 2014

Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / 2xRadeonHD 4870 in CrossfireX
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube